Home |
Search |
Today's Posts |
|
Woodturning (rec.crafts.woodturning) To discuss tools, techniques, styles, materials, shows and competitions, education and educational materials related to woodturning. All skill levels are welcome, from art turners to production turners, beginners to masters. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.woodturning
|
|||
|
|||
My Shop is almost (re)done
6 Days of cleaning and organizing, I finally got the new lathe to fit
in. Not well, but in. I built a tool holder for the lathe that mounts on the table behind the lathe and high enough to reach all my tools. I thenb moved the lathe near a wall and mounted the rest of the items I have on some pegboard behind it. After my wife asked a few questions about how I store stuff, I decided to ask all of you this question. How do you prefer to store your tools and accessories? Open racks (pegboard like)? Cabinets? Tool Boxes? I have found that I am not a big fan of cabinets, tool boxes or tool bags. I like my tools out where I can see them and get to them quick.Not through need, but I seem to use the right tool for the right job more often and spend a little more time selecting the tool than I do looking for it. So, I have a LOT of pegboard and just a few cabinets, and my main cabinets are either open (no door) or have a glass door. Yewsterday I spent about 2 hours figuring out where to mount some of my Pinnacle and Starrett measuring tools and now I am looking for an effective way to store some items like my Incra and Veritas gauges, dovetail gauges, marking gauges, enginners squares and one of those combination squares with 3 different level devices. I do have some drawers that I built that are under some of my larger tools, 3 drawers under my router tablke to hold router associated tools, under my high speed grinder for nothing since it is usless, under my carving table for carving wood storage, etc. |
#2
Posted to rec.crafts.woodturning
|
|||
|
|||
My Shop is almost (re)done
On May 31, 8:06 am, Neillarson wrote:
6 Days of cleaning and organizing, I finally got the new lathe to fit in. Not well, but in. I built a tool holder for the lathe that mounts on the table behind the lathe and high enough to reach all my tools. I thenb moved the lathe near a wall and mounted the rest of the items I have on some pegboard behind it. After my wife asked a few questions about how I store stuff, I decided to ask all of you this question. How do you prefer to store your tools and accessories? Open racks (pegboard like)? Cabinets? Tool Boxes? I have found that I am not a big fan of cabinets, tool boxes or tool bags. I like my tools out where I can see them and get to them quick.Not through need, but I seem to use the right tool for the right job more often and spend a little more time selecting the tool than I do looking for it. So, I have a LOT of pegboard and just a few cabinets, and my main cabinets are either open (no door) or have a glass door. Yewsterday I spent about 2 hours figuring out where to mount some of my Pinnacle and Starrett measuring tools and now I am looking for an effective way to store some items like my Incra and Veritas gauges, dovetail gauges, marking gauges, enginners squares and one of those combination squares with 3 different level devices. I do have some drawers that I built that are under some of my larger tools, 3 drawers under my router tablke to hold router associated tools, under my high speed grinder for nothing since it is usless, under my carving table for carving wood storage, etc. I like to use a roll around tool chest. You can put the tools you will need for that project on top and store your other chucks and tools inside away from the shavings and other such stuff. I made a wooden top to sit on the chest with a slanted board on the back to hold my live centers, drive centers and a couple of my most used chucks. I use wall cabinets for the same reason. Everthing I have hanging on the wall collects lots of shavings and makes cleaning up a harder and longer chore. Having seen a lot of other setups and tried many of them myself this is what I find works best for me. Also I have a magnetic strip hanging above my lathe that holds the chuck keys, allen wrenchs, and bars for removing the chucks. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
"non-shop" stuff that's useful in the shop | Woodworking | |||
Shop Dogs and Cats - Bah! Shop Doves? | Woodworking | |||
Shop equipment, and a machine shop class question.. | Metalworking | |||
Shop Vac or Shop Pro ? | Woodworking | |||
Shop Built Wide belt sander vs Shop Built Drum sander....Whats easyer to make. Im no engineer. | Woodworking |