Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Sealant - Again
Sorry to ask - thought i'd give it one more try!
What do the experts recommend as a width for sealant around a bath. I've been putting this job off for weeks now as the last time I attempted it, it looked as Stevie Wonder had put the Silicone down. How wide should the gap be between the two bits of masking tape (thanks for the tip on an earlier post)???. I cant delay any longer, 'er indoors wants to know why we still cant use the bath.......I'd be really grateful for more expert advice - my wet finger has a date with some silicone and I cant delay any more! Thanks Alex |
#2
|
|||
|
|||
"alexbartman" wrote in message
... Sorry to ask - thought i'd give it one more try! What do the experts recommend as a width for sealant around a bath. I've been putting this job off for weeks now as the last time I attempted it, it looked as Stevie Wonder had put the Silicone down. How wide should the gap be between the two bits of masking tape (thanks for the tip on an earlier post)???. I cant delay any longer, 'er indoors wants to know why we still cant use the bath.......I'd be really grateful for more expert advice - my wet finger has a date with some silicone and I cant delay any more! Thanks Alex Just re-done my shower tray and as well as using yea olde masking tape method I used a Plasplugs £2 silicone sealant scraper from B&Q. Note you push it along scooping up the execess sealant as it goes. Best silicone I have done years. |
#3
|
|||
|
|||
Huge wrote:
(Huge) writes: [16 lines snipped] leaving the two trails of surplus in place until it set, then pealing "Peeling", you useless ****. And there was me thinking you were putting a bell mouth drip along the bath David |
#4
|
|||
|
|||
Huge wrote:
Lobster writes: Huge wrote: (Huge) writes: [16 lines snipped] leaving the two trails of surplus in place until it set, then pealing "Peeling", you useless ****. And there was me thinking you were putting a bell mouth drip along the bath It would make a change. So I've been tolled |
#5
|
|||
|
|||
Ian Middleton wrote:
Snipped 16 lines Just re-done my shower tray and as well as using yea olde masking tape method I used a Plasplugs £2 silicone sealant scraper from B&Q. Note you push it along scooping up the execess sealant as it goes. Best silicone I have done years. I realised only yesterday that according to the packaging on the backof my screwfix sourced silicon that you are meant to push the silicon gun away from you when applying it... not pull it towards you like i do!! I dare say that it wouldnt make too much of a difference if you are masking / fingering it afterwards. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sealant for granite kitchen countertops | Home Repair | |||
Sealant and showers | UK diy | |||
Bath sealant | UK diy | |||
Sealant around bath not setting! | UK diy | |||
bathroom sealant | UK diy |