Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Superglue as stud 'n bearing fit?
No-one wants his their nuts to drop off.. But rather than Loctite's rather expensive Stud & Bearing fit, has anyone tried good old superglue? I often wonder if it would work equally well.... not the least because it's much cheaper and easier to obtain. Anyone tried it for this application? Thanks J |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
Andy Dingley wrote:
On Wed, 19 Jan 2005 14:00:45 GMT, (Jimmy) wrote: No-one wants his their nuts to drop off.. But rather than Loctite's rather expensive Stud & Bearing fit, has anyone tried good old superglue? Your typical poundshop superglue doesn't like anything oily. It's also brittle, which might cause vibration problems. snip To fix your washing machine, you can use earwax if that's all you have. But if it matters, use the right one. Most of my stash is freshly-time-expired mil-surplus, bought for peanuts. IIRC, loctite doesn't 'go off' when expired. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
pulling a stuck ball bearing | Metalworking | |||
Removing Timken Tapered Bearing From Spindle | Metalworking | |||
OT Guns more Guns | Metalworking | |||
what is involved in stud welding? | Metalworking | |||
Radial arm saw repair hell (long) | Woodworking |