On Monday, May 10, 2021 at 10:51:23 AM UTC+1, Andy Burns wrote:
https://ironmongeryexperts.co.uk/65mm-saa-heavy-pattern-handrail-bracket.html

That won't do it I'm afraid.

On 10/05/2021 10:55, me wrote:
On Monday, May 10, 2021 at 10:51:23 AM UTC+1, Andy Burns wrote:
https://ironmongeryexperts.co.uk/65mm-saa-heavy-pattern-handrail-bracket.html

That won't do it I'm afraid.



You haven't explained clearly what you want to do, and your reply quoted
above does not help to clarify. GIGO.

On 10 May 2021 at 10:59:42 BST, "GB" wrote:

On 10/05/2021 10:55, me wrote:
On Monday, May 10, 2021 at 10:51:23 AM UTC+1, Andy Burns wrote:

https://ironmongeryexperts.co.uk/65mm-saa-heavy-pattern-handrail-bracket.html

That won't do it I'm afraid.



You haven't explained clearly what you want to do, and your reply quoted
above does not help to clarify. GIGO.

He said he wants to terminate a handrail perpendicularly to a wall. That
seems pretty clear to me. The only question is how deep a hole in the wall he
is willing to make. Assuming it is a wooden rail I would make a hole chased
into the masonry deep enough and wide enough to cover at least two metal
brackets screwed to the sides of the rail and to the wall, and plaster over
them.

--
Roger Hayter

On 10/05/2021 10:55, me wrote:
On Monday, May 10, 2021 at 10:51:23 AM UTC+1, Andy Burns wrote:
https://ironmongeryexperts.co.uk/65mm-saa-heavy-pattern-handrail-bracket.html

That won't do it I'm afraid.

Why not, exactly? Is the oval vertical, or horizontal (if you see what I
mean). What are its dimensions?

Although this is "designed" as a base for an upright, no reason why it
can't be used on a wall

https://www.alvinkeyclamp.co.uk/prod...ing-base-a12-6

On Monday, May 10, 2021 at 1:48:19 PM UTC+1, newshound wrote:
https://www.alvinkeyclamp.co.uk/prod...ing-base-a12-6

That's exactly the sort of thing I was thinking of but the rail is oval and the rail needs to be attached horizontally

On 10/05/2021 14:57, me wrote:
On Monday, May 10, 2021 at 1:48:19 PM UTC+1, newshound wrote:
https://www.alvinkeyclamp.co.uk/prod...ing-base-a12-6

That's exactly the sort of thing I was thinking of but the rail is oval and the rail needs to be attached horizontally

Then chose one where the pipe is about half the minimum diameter of your
rail, get say a six inch length of pipe and bore into your rail to suit,
securing it with a couple of vertical cross-bolts. Dome headed on top,
counterbored underneath to conceal the nuts. You might want large
diameter washers underneath to reduce the risk of rail splitting.

me wrote
Andy Burns wrote

https://ironmongeryexperts.co.uk/65mm-saa-heavy-pattern-handrail-bracket.html

That won't do it I'm afraid.

You need to say why if you want useful answers.

On Tue, 11 May 2021 05:55:04 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:

FLUSH the trolling senile asshole's latest troll**** unread


--
JimK addressing senile Rodent Speed:
"I really feel the quality of your trolling has dropped in the last few
months..."
MID: