UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 39,563
Default Removing Leatherette Surface

On 12/04/2021 23:05, Clive Arthur wrote:
On 12/04/2021 21:02, newshound wrote:
On 12/04/2021 18:24, Clive Arthur wrote:
I sometimes repair and refurbish Roberts DAB radios as a sort of
hobby. I do a few minutes a day while waiting for simulations to
finish, or just thinking.Â* There are a few fairly common faults and I
have the gear.

These are covered in a sort of leatherette, I suppose.Â* This is of
appalling quality and is usually very badly worn and torn, even after
a couple of years of just sitting on a shelf.Â* This is good, it makes
them inexpensive.

My "real" analogue Roberts from the 60's still looked good after 30
years.


Yes, I have a pre-DAB FM one and an old MW/LW RT1 from Harrods both of
which are good.Â* The problem was with the RD-50 and RD-60 models.Â* This
one is typical...

https://www.ebay.co.uk/itm/Roberts-R...53.m1438.l2649


...some are much worse.Â* I had one which was an expensive gift, and
after a couple or three years it looked like that, though it had hardly
been touched.Â* Roberts deny it's a manufacturing fault, but they're
clearly lying.Â* Even some of the circuitry looks like it's been designed
by someone on work experience.

They lost their way, I don't know if they're any good nowadays.

Years ago my mum was throwing out an old AM tranny radio whose case was
getting like that - i seem to remember it featured red velvet that had
all worn off. I built a wooden case for it and veneered it and bought a
strap to complete it. She loved it and used it another ten years or so.

Ah. This was it.

https://www.ebay.co.uk/itm/Vintage-1...s/274753914426

--
"The great thing about Glasgow is that if there's a nuclear attack it'll
look exactly the same afterwards."

Billy Connolly


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for small, surface mount (as in mount on a surface, not SMD) switches Chris Green UK diy 55 September 19th 16 12:00 PM
Patching leatherette armchair Windmill[_5_] UK diy 5 August 25th 14 08:13 PM
Antique leatherette case smells like poop, crap, etc. (can't findprevious thread on this topic) msg Electronics Repair 17 May 22nd 09 08:59 PM
Removing surface mount diode Hamad bin Turki Salami Electronics Repair 9 January 13th 06 12:20 PM
Removing Surface Rust from iron Rich Metalworking 21 January 29th 05 05:42 AM


All times are GMT +1. The time now is 04:29 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"