UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 168
Default Mains failure

On 17/03/2021 02:19 pm, Biggles wrote:
On 14/03/2021 11:28, Dave Plowman (News) wrote:
Snipped

As it happens I know a bit about her wiring. Some years ago I installed
the cordless phones for her. As the cabled one was in the very cold
hallway. Put an extension BT socket in the lounge and also a mains socket
for the base station since there wasn't one handy. The second one went in
her bedroom, I was told. Left the original phone in the hall, still
working normally.

Snipped

I have a wired BT handset adjacent to my broadband router and cordless
phone base station. An Openreach engineer asked me why I had two
handsets next to each other. I explained that one would still work in a
power cut, he seemed surprised at the answer.


When I was a kid in Liverpool, we NEVER had power cuts unless I managed
to blow a domestic fuse (there was only one) whilst "messing about".

OK, we had a couple of denials of service during the strikes of 1970 and
1971, but they were caused by selective switching, not by system failure.

In a village in SE England, though, power cuts have been quite common. I
got the Parish Council to complain about it.
  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,704
Default Mains failure

On 17/03/2021 14:19, Biggles wrote:
On 14/03/2021 11:28, Dave Plowman (News) wrote:
Snipped

As it happens I know a bit about her wiring. Some years ago I installed
the cordless phones for her. As the cabled one was in the very cold
hallway. Put an extension BT socket in the lounge and also a mains socket
for the base station since there wasn't one handy. The second one went in
her bedroom, I was told. Left the original phone in the hall, still
working normally.

Snipped

I have a wired BT handset adjacent to my broadband router and cordless
phone base station. An Openreach engineer asked me why I had two
handsets next to each other. I explained that one would still work in a
power cut, he seemed surprised at the answer.


A sensible cordless base station would have a corded handset that works
with no power.

--
Max Demian
  #3   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,655
Default Mains failure

On 17/03/2021 17:21, Max Demian wrote:
On 17/03/2021 14:19, Biggles wrote:
On 14/03/2021 11:28, Dave Plowman (News) wrote:
Snipped

As it happens I know a bit about her wiring. Some years ago I installed
the cordless phones for her. As the cabled one was in the very cold
hallway. Put an extension BT socket in the lounge and also a mains
socket
for the base station since there wasn't one handy. The second one
went in
her bedroom, I was told. Left the original phone in the hall, still
working normally.

Snipped

I have a wired BT handset adjacent to my broadband router and cordless
phone base station. An Openreach engineer asked me why I had two
handsets next to each other. I explained that one would still work in
a power cut, he seemed surprised at the answer.


A sensible cordless base station would have a corded handset that works
with no power.

Such things do exist.
  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 40,893
Default Mains failure



"Max Demian" wrote in message
o.uk...
On 17/03/2021 14:19, Biggles wrote:
On 14/03/2021 11:28, Dave Plowman (News) wrote:
Snipped

As it happens I know a bit about her wiring. Some years ago I installed
the cordless phones for her. As the cabled one was in the very cold
hallway. Put an extension BT socket in the lounge and also a mains
socket
for the base station since there wasn't one handy. The second one went
in
her bedroom, I was told. Left the original phone in the hall, still
working normally.

Snipped

I have a wired BT handset adjacent to my broadband router and cordless
phone base station. An Openreach engineer asked me why I had two handsets
next to each other. I explained that one would still work in a power cut,
he seemed surprised at the answer.


A sensible cordless base station would have a corded handset that works
with no power.


Never seen a single one like that.

  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 15,560
Default Lonely Obnoxious Cantankerous Auto-contradicting Senile Ozzie Troll Alert!

On Thu, 18 Mar 2021 08:16:57 +1100, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:


Never seen a single one like that.


Of COURSE not, you idiotic auto-contradicting senile pest! tsk

--
Kerr-Mudd,John addressing the auto-contradicting senile cretin:
"Auto-contradictor Rod is back! (in the KF)"
MID:


  #6   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 43,017
Default Mains failure

In article ,
Max Demian wrote:
A sensible cordless base station would have a corded handset that works
with no power.


You jest, I assume? Clutter the thing up with something you may never need?

--
*My luck is so bad that if I bought a cemetery, people would stop dying.

Dave Plowman London SW
To e-mail, change noise into sound.
  #7   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 6,213
Default Mains failure

On 18/03/2021 01:05, Dave Plowman (News) wrote:
In article ,
Max Demian wrote:
A sensible cordless base station would have a corded handset that works
with no power.


You jest, I assume? Clutter the thing up with something you may never need?


I have two keyboards on this PC. A USB one used all the time and
a PS/2 DEC LK466 one tucked behind the system unit in case there
is an issue with upgrades (it always works).
  #8   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,264
Default Mains failure

"Dave Plowman (News)" wrote:
In article ,
Max Demian wrote:
A sensible cordless base station would have a corded handset that works
with no power.


You jest, I assume? Clutter the thing up with something you may never need?


It wouldn't take a lot to add a couple of contacts to the handset so it
works without using RF when resting on the base station. Although the
question then is what you can power from the line voltage and how you
arrange that, as there might not be enough for all the fancy displays etc.

Theo
  #9   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 43,017
Default Mains failure

In article ,
Theo wrote:
"Dave Plowman (News)" wrote:
In article , Max
Demian wrote:
A sensible cordless base station would have a corded handset that
works with no power.


You jest, I assume? Clutter the thing up with something you may never
need?


It wouldn't take a lot to add a couple of contacts to the handset so it
works without using RF when resting on the base station. Although the
question then is what you can power from the line voltage and how you
arrange that, as there might not be enough for all the fancy displays
etc.


Be easier to simply add re-chargeable battery backup to the base station?
You wouldn't then have to find the instructions on how to use it in event
of a mains failure. It would be seamless. But a lot of extra cost for a
'just in case'

--
*Don't byte off more than you can view *

Dave Plowman London SW
To e-mail, change noise into sound.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mains transformer failure N_Cook Electronics Repair 2 July 5th 11 08:11 AM
Mains transformer secondary filter cap failure N Cook Electronics Repair 8 January 16th 08 07:46 AM
Mains failure switch-over circuit needed Warmbells Electronics 5 October 24th 06 12:26 PM
Mains failure gennie switching Chris Wilson Electronics Repair 7 November 9th 03 12:31 AM
Mains failure generator switching tips? Chris Wilson UK diy 5 October 15th 03 12:12 AM


All times are GMT +1. The time now is 07:09 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"