I'm looking (unsuccessfully so far) for the mating half to this, 'DC
barrel connector'?:

https://ibb.co/pdK0jRS

It's looks to be about 8mm ID and the pin 2.5mm OD, it's the end of a
42V / 2A Li-Ion battery charger for an electric scooter (two wheeler
type).

I would be happy to find one in any form but ideally either chassis
(so I can fit it in a small 3D printed box) or in-line, so I can
convert it to something that is easier to interface for testing etc.

I was wondering if it might be the same size as the DC in on some of
those micro PC's or I've seen on some odd models of laptop and whilst
it looks familiar, it's around 8mm OD, not 5.5. ;-(

If the charger were mine I might cut the connector off and re-join it
with some Powerpoles or XT60's but it isn't (I have one on order).


Cheers, T i m

On 11/10/2020 12:59, T i m wrote:
I'm looking (unsuccessfully so far) for the mating half to this, 'DC
barrel connector'?:

https://ibb.co/pdK0jRS

It's looks to be about 8mm ID and the pin 2.5mm OD, it's the end of a
42V / 2A Li-Ion battery charger for an electric scooter (two wheeler
type).

I would be happy to find one in any form but ideally either chassis
(so I can fit it in a small 3D printed box) or in-line, so I can
convert it to something that is easier to interface for testing etc.

I was wondering if it might be the same size as the DC in on some of
those micro PC's or I've seen on some odd models of laptop and whilst
it looks familiar, it's around 8mm OD, not 5.5. ;-(

If the charger were mine I might cut the connector off and re-join it
with some Powerpoles or XT60's but it isn't (I have one on order).


Cheers, T i m



Maybe, possibly?
https://www.smartboardsuk.com/collec...cf14febd&_ss=r

On 11/10/2020 16:15, Lee wrote:
On 11/10/2020 12:59, T i m wrote:
I'm looking (unsuccessfully so far) for the mating half to this, 'DC
barrel connector'?:


https://www.aliexpress.com/i/4000185...9e3771Y IaaJM

If you are not exactly in a hurry

On Sun, 11 Oct 2020 16:26:46 +0100, Lee
wrote:

On 11/10/2020 16:15, Lee wrote:
On 11/10/2020 12:59, T i m wrote:
I'm looking (unsuccessfully so far) for the mating half to this, 'DC
barrel connector'?:


https://www.aliexpress.com/i/4000185...9e3771Y IaaJM

If you are not exactly in a hurry

Thanks for both of those Lee, they do look like the right thing. Have
you seen any dimensions or are we going on the idea that it looks
right and it's from a scooter etc?

I'll check the make of the scooter (I only have the battery and
charger) and if it's a Xiaomi the chances are it is the right one.

Cheers, T i m

On 11/10/2020 18:30, T i m wrote:
On Sun, 11 Oct 2020 16:26:46 +0100, Lee
wrote:

On 11/10/2020 16:15, Lee wrote:
On 11/10/2020 12:59, T i m wrote:
I'm looking (unsuccessfully so far) for the mating half to this, 'DC
barrel connector'?:


https://www.aliexpress.com/i/4000185...9e3771Y IaaJM

If you are not exactly in a hurry

Thanks for both of those Lee, they do look like the right thing. Have
you seen any dimensions or are we going on the idea that it looks
right and it's from a scooter etc?

I'll check the make of the scooter (I only have the battery and
charger) and if it's a Xiaomi the chances are it is the right one.

Cheers, T i m



It's a sort of a+b=c thing, they sell the charger lead which they state
is 8mm*2.5, for the same model.
Also Wikipedia (I know) says that while this connector isn't standard as
such, it does tend to be used for scooters and Ebikes.

Describes it as 8mm

https://www.aliexpress.com/item/4000...archweb201603_

On Sun, 11 Oct 2020 20:50:42 +0100, Lee
wrote:

Describes it as 8mm

https://www.aliexpress.com/item/4000...archweb201603_

Thanks again for looking Lee,

Whilst that looks the same sort of thing, I don't think it's it. If
you look back at the end of the lead on the charger I have here, it
would (take / plug into) something that looks like a standard laptop
barrel connector, with the centre pin in the laptop socket.

So this lead connects via the pin on the *charger* lead to a mating
hole in the socket (that must have internal connection) and the
charger lead goes *over* the scooter socket plastic core that needs an
external contact on it.

My charger lead plug looks like this:
https://ibb.co/pdK0jRS

The Ali Express charger lead looks like this:
https://ibb.co/RBC97TM

So this could work:
https://www.aliexpress.com/i/4000185...9e3771Y IaaJM

If the hole in the middle will take a 2.5mm OD pin.

The plastic boss in the middle is less than 8mm OD and has an
electrical connection on it.

The ID of the outer hole is greater than the 12.5mm OD of the outer
part of the plug on my lead (and it could be all of those, assuming
the lead you linked to isn't the natural partner for the socket). ;-)

Cheers, T i m

On 11/10/2020 12:59, T i m wrote:
I'm looking (unsuccessfully so far) for the mating half to this, 'DC
barrel connector'?:

https://ibb.co/pdK0jRS

It's looks to be about 8mm ID and the pin 2.5mm OD, it's the end of a
42V / 2A Li-Ion battery charger for an electric scooter (two wheeler
type).

I would be happy to find one in any form but ideally either chassis
(so I can fit it in a small 3D printed box) or in-line, so I can
convert it to something that is easier to interface for testing etc.

I was wondering if it might be the same size as the DC in on some of
those micro PC's or I've seen on some odd models of laptop and whilst
it looks familiar, it's around 8mm OD, not 5.5. ;-(

If the charger were mine I might cut the connector off and re-join it
with some Powerpoles or XT60's but it isn't (I have one on order).


Cheers, T i m


I don't suppose it would fit a phono socket?

--
Cheers
Clive

On 11/10/2020 22:00, T i m wrote:
On Sun, 11 Oct 2020 20:50:42 +0100, Lee
wrote:

Describes it as 8mm

https://www.aliexpress.com/item/4000...archweb201603_

Thanks again for looking Lee,

Whilst that looks the same sort of thing, I don't think it's it. If
you look back at the end of the lead on the charger I have here, it
would (take / plug into) something that looks like a standard laptop
barrel connector, with the centre pin in the laptop socket.

So this lead connects via the pin on the *charger* lead to a mating
hole in the socket (that must have internal connection) and the
charger lead goes *over* the scooter socket plastic core that needs an
external contact on it.

My charger lead plug looks like this:
https://ibb.co/pdK0jRS

The Ali Express charger lead looks like this:
https://ibb.co/RBC97TM

So this could work:
https://www.aliexpress.com/i/4000185...9e3771Y IaaJM

If the hole in the middle will take a 2.5mm OD pin.

The plastic boss in the middle is less than 8mm OD and has an
electrical connection on it.

The ID of the outer hole is greater than the 12.5mm OD of the outer
part of the plug on my lead (and it could be all of those, assuming
the lead you linked to isn't the natural partner for the socket). ;-)

Cheers, T i m




I see what you mean. Side by side, your one looks hopelessly custom

On Sun, 11 Oct 2020 23:39:18 +0100, Lee
wrote:

snip

I see what you mean. Side by side, your one looks hopelessly custom

You might be right. It's got a Euro type two pin mains plug on it and
I think was bought a while ago ... or the charger has been replaced.

I'll ping my mate tomorrow and get the make of the scooter and see if
that sheds any light.

If all else fails and assuming there is room etc, I could fit a Canon
XLR socket (they do them with a little cover to keep the cr*p out) to
the scooter and fit a mating plug on this charger.

Cheers, T i m

On Sun, 11 Oct 2020 22:39:38 +0100, Clive Arthur
wrote:

snip

I don't suppose it would fit a phono socket?

It's the right layout (well spotted) as long as it 'connects' I should
at least be able to make up a test lead to charge the battery with the
supplied charger till I can learn more about the scooter itself (that
I don't have). ;-)

Cheers, T i m

On Sun, 11 Oct 2020 22:39:38 +0100, Clive Arthur
wrote:

snip

I don't suppose it would fit a phono socket?

I found my box of connectors this morning and tried a F-F phono
adaptor in the charger lead and it does seem to fit. So I plugged a
rewireable phone plug in the other end, powered the charger up and
measured 40V on the phono, so whilst it may not be the right thing, it
does seem to work (with no current at least). ;-)

I'm going to make up a lead later and give it a try.

Thanks for the thought Clive. ;-)

Cheers, T i m

On Sun, 11 Oct 2020 12:59:09 +0100, T i m wrote:


I'm looking (unsuccessfully so far) for the mating half to this, 'DC
barrel connector'?:

https://ibb.co/pdK0jRS

It's looks to be about 8mm ID and the pin 2.5mm OD, it's the end of a
42V / 2A Li-Ion battery charger for an electric scooter (two wheeler
type).

I would be happy to find one in any form but ideally either chassis
(so I can fit it in a small 3D printed box) or in-line, so I can
convert it to something that is easier to interface for testing etc.

I was wondering if it might be the same size as the DC in on some of
those micro PC's or I've seen on some odd models of laptop and whilst
it looks familiar, it's around 8mm OD, not 5.5. ;-(

If the charger were mine I might cut the connector off and re-join it
with some Powerpoles or XT60's but it isn't (I have one on order).


Cheers, T i m


The 8mm dia power supply lead for my HP Pavilion g6 laptop looks as if
it would plug into the one in your picture.
--
Dave W

On Sun, 18 Oct 2020 00:52:55 +0100, Dave W
wrote:

On Sun, 11 Oct 2020 12:59:09 +0100, T i m wrote:

I'm looking (unsuccessfully so far) for the mating half to this, 'DC
barrel connector'?:

https://ibb.co/pdK0jRS

It's looks to be about 8mm ID and the pin 2.5mm OD, it's the end of a
42V / 2A Li-Ion battery charger for an electric scooter (two wheeler
type).

I would be happy to find one in any form but ideally either chassis
(so I can fit it in a small 3D printed box) or in-line, so I can
convert it to something that is easier to interface for testing etc.

I was wondering if it might be the same size as the DC in on some of
those micro PC's or I've seen on some odd models of laptop and whilst
it looks familiar, it's around 8mm OD, not 5.5. ;-(

If the charger were mine I might cut the connector off and re-join it
with some Powerpoles or XT60's but it isn't (I have one on order).


Cheers, T i m

The 8mm dia power supply lead for my HP Pavilion g6 laptop looks as if
it would plug into the one in your picture.

I can't quite see from the eBay PSU pictures but does your plug have a
pin in the very middle or a hole?

Cheers, T i m

On Fri, 16 Oct 2020 12:26:13 +0100, T i m wrote:

On Sun, 11 Oct 2020 22:39:38 +0100, Clive Arthur
wrote:

snip

I don't suppose it would fit a phono socket?

I found my box of connectors this morning and tried a F-F phono
adaptor in the charger lead and it does seem to fit. So I plugged a
rewireable phone plug in the other end, powered the charger up and
measured 40V on the phono, so whilst it may not be the right thing, it
does seem to work (with no current at least). ;-)

I'm going to make up a lead later and give it a try.

Thanks for the thought Clive. ;-)

And I did and it worked ok. ;-)

I've ordered an inline socket so I can do away with the F-F converter
and male plug.

My mate can see the actual eScooter in his shop but can't actually get
to it ATM to see what the charging socket looks like. It may well be a
phono but I have a feeling it will be slightly more 'engineered' (and
they often have a waterproof cover over them).

But the phono certainly got me going, thanks. ;-)

Cheers, T i m