Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#8
![]() |
|||
|
|||
![]()
On Tue, 7 Sep 2004 09:34:46 +0100, "Christian McArdle"
wrote: I have an airing cupboard, a hot water tank and my boiler has a pump. How/why does the combi boiler get rid of both the latter? The difference between the (instantaneous) combi and the non-combi boiler is that the combi boiler has a heat exchanger that heats the incoming cold water as you need it. It does this without any tanks or hot or cold water storage. Advantages are that it uses the full mains pressure, so you get excellent showers (assuming a reasonable water supply). Unfortunately, it will heat only so much water at a time, so bath filling tends to be slow. They are a good choice for houses where the bath is used infrequently, as they are cheaper, smaller and more efficient than a storage based solution. It gets rid of the external pump, because they almost invariably have an internal one, making the external one redundant. Even most non-combi boilers have a built in pump these days. Christian. Ah, right. I couldn't do without my baths, though! I lived with a shower for 12 years (i.e. no bath) and the joy of a relaxing, piping hot bath, especially on a cold winter's morning, is irreplaceable. MM |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Near death boiler + replacing a boiler | UK diy | |||
Need Help with Gas Boiler Vent Problem! | Home Repair | |||
Another heating problem question! | UK diy | |||
Replacing Pressure relief valve on Baxi Boiler | UK diy | |||
Replacing a boiler | UK diy |