Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Reconditioning dripping ceramic disc tap?
On Wednesday, March 17, 2004 at 2:40:42 PM UTC, Lobster wrote:
My kitchen mixer tap is one of those with a 90-degree on-off levers on the H&C taps, with ceramic discs inside; unfortunately the hot tap is dripping quite badly (sufficiently so for the tap always to feel warm from the leaking hot water). Having trawled the uk.d-i-y archives for a solution, I did as directed and removed the cartridge from the tap and took it a couple of plumber's merchants to get a replacement. One said it was no longer made, buy a new tap (it's only 2-3 years old); the other said without the manufacturer's name (which I've no idea) he couldn't help. Before I go and buy a new tap :-( has anybody had any experience with cleaning up or reconditioning these cartridges? If so, how? Mine comes apart easily to give two small white discs with triangular holes through, and they look perfectly clean and flat to me. Or any other suggestions? Cheers David I found that putting a fibre washer between the cartridge and the tap has sorted my dripping tap. I suspect the ceramic discs do not leak but the blue/red plastic rings deteriorate with time. Try it. |
#2
Posted to uk.d-i-y
|
|||
|
|||
Reconditioning dripping ceramic disc tap?
|
#3
Posted to uk.d-i-y
|
|||
|
|||
Reconditioning dripping ceramic disc tap?
On Wed, 04 Mar 2020 09:27:33 -0800, kevidennis13 wrote:
I found that putting a fibre washer between the cartridge and the tap has sorted my dripping tap. I suspect the ceramic discs do not leak but the blue/red plastic rings deteriorate with time. Try it. He probably did try it 16 years ago! -- TOJ |
#5
Posted to uk.d-i-y
|
|||
|
|||
Reconditioning dripping ceramic disc tap?
On Wednesday, March 4, 2020 at 6:17:37 PM UTC, Brian Gaff (Sofa 2) wrote:
2004 eh, well there is a thing. I hate ceramic taps, thinking of starting a special ceramic tap hating society.. grin. Brian -- ----- -- This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please Note this Signature is meaningless.! wrote in message ... On Wednesday, March 17, 2004 at 2:40:42 PM UTC, Lobster wrote: My kitchen mixer tap is one of those with a 90-degree on-off levers on the H&C taps, with ceramic discs inside; unfortunately the hot tap is dripping quite badly (sufficiently so for the tap always to feel warm from the leaking hot water). Having trawled the uk.d-i-y archives for a solution, I did as directed and removed the cartridge from the tap and took it a couple of plumber's merchants to get a replacement. One said it was no longer made, buy a new tap (it's only 2-3 years old); the other said without the manufacturer's name (which I've no idea) he couldn't help. Before I go and buy a new tap :-( has anybody had any experience with cleaning up or reconditioning these cartridges? If so, how? Mine comes apart easily to give two small white discs with triangular holes through, and they look perfectly clean and flat to me. Or any other suggestions? Cheers David I found that putting a fibre washer between the cartridge and the tap has sorted my dripping tap. I suspect the ceramic discs do not leak but the blue/red plastic rings deteriorate with time. Try it. Some good news about the repair of these wretched ceramic quarter turn tap cartridge valves - THEY CAN BE REPAIRED! Kev above is 100% correct. I had previously repeatedly removed the cartridges, dismantled and inspected them, cleaned, de-calc'd the parts in a variety of fluids, greased them back up and replaced them - only for a drip to reappear. The tell-tale was that only the coloured rubber end seals (like a bloated grommet/washer and both white in my case) looked slightly distorted, where each has been forced against the tap body, as they get tightened up. So, I tweaked the sensible advice above about adding a washer but I have replaced the original white end-seal with a slightly thicker but same diameter black ordinary plumbers sealing washer. I actually got mine from Halfords - they sell them in a mixed box for about £8 for a hundred red fibre and black washers. It makes the tap operation feel slightly more resistant but smoother and most importantly - no bl**dy drips. It should stay fixed for another nine years and if not - I'll just replace the washers again. They look to be the only part that can ever actually wear as the ceramic should last forever, the brass casing looks pristine and the plastic parts are all greased and only travel a maximum of a quarter-turn in each direction. My sincere thanks to everyone that pointed the way. I previously discovered the make and model of my tap and the replacement cartridges (£32 & £4 delivery) but I've saved that and since I already had the Halfords kit, for the car, I reckon the fix entailed, some standard cleaning fluid, some plumbers grease and two rubber washers. Now, where's my celebratory beer...€¦..? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reconditioning dripping ceramic disc tap? | UK diy | |||
Reconditioning dripping ceramic disc tap? | UK diy | |||
Reconditioning dripping ceramic disc tap? | UK diy | |||
Ceramic disk tap - where to get replacement ceramic disc or repair otherwise? | UK diy | |||
Ceramic "disc" tap dripping. | UK diy |