Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
We have a hot-water cylinder with 2 immersion heaters.
(2 heaters ecause we have no other means of heating bath/shower volumes of water, and need a reserve heater in case of heater failure.) At the moment each heater is separately connected, with the inherent danger that someone will try to switch BOTH on, with a consequent fuse overload. Is there such a mains unit that would provide for 2 inputs, and offer a 3- way choice of: (1) Heater 1 or (2) Heater 2 or (3) Neither ?? -- /\/\aurice (Retired in E.Hants) (Replace "nomail.afraid" by "bcs" to reply by email) |
#2
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
On 05/07/2019 15:11, Maurice wrote:
We have a hot-water cylinder with 2 immersion heaters. (2 heaters ecause we have no other means of heating bath/shower volumes of water, and need a reserve heater in case of heater failure.) At the moment each heater is separately connected, with the inherent danger that someone will try to switch BOTH on, with a consequent fuse overload. Is there such a mains unit that would provide for 2 inputs, and offer a 3- way choice of: (1) Heater 1 or (2) Heater 2 or (3) Neither ?? Most electrical accessory manufacturers produce a dual immersion heater switch that should satisfy your requirements. eg MK K5207WHI |
#3
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
On Friday, 5 July 2019 15:11:05 UTC+1, Maurice wrote:
We have a hot-water cylinder with 2 immersion heaters. Is there such a mains unit that would provide for 2 inputs, and offer a 3- way choice of: As well as the manual bath/shower switch MK K5207WHI mentioned by Tuffnell Park below, economy 7 controllers like https://www.electricaldirect.co.uk/p...control-556045 will do the bottom heater on timed (which can be adjusted using tappets behind the clockface) and the top heater on boost, but not simultaneously. Owain |
#4
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
Many systems use two heaters in one tank. Can the circuit be upgraded? Its
not going to blow up after all. Brian -- ----- -- This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please Note this Signature is meaningless.! "Maurice" wrote in message ... We have a hot-water cylinder with 2 immersion heaters. (2 heaters ecause we have no other means of heating bath/shower volumes of water, and need a reserve heater in case of heater failure.) At the moment each heater is separately connected, with the inherent danger that someone will try to switch BOTH on, with a consequent fuse overload. Is there such a mains unit that would provide for 2 inputs, and offer a 3- way choice of: (1) Heater 1 or (2) Heater 2 or (3) Neither ?? -- /\/\aurice (Retired in E.Hants) (Replace "nomail.afraid" by "bcs" to reply by email) |
#6
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
On Friday, 5 July 2019 15:11:05 UTC+1, Maurice wrote:
We have a hot-water cylinder with 2 immersion heaters. (2 heaters ecause we have no other means of heating bath/shower volumes of water, and need a reserve heater in case of heater failure.) At the moment each heater is separately connected, with the inherent danger that someone will try to switch BOTH on, with a consequent fuse overload. Is there such a mains unit that would provide for 2 inputs, and offer a 3- way choice of: (1) Heater 1 or (2) Heater 2 or (3) Neither ?? I presume that if you ran them in series most of the time they'd last a lot better. Series or not could be controlled by a 2nd stat. NT |
#7
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
On 05/07/2019 15:45, wrote:
On Friday, 5 July 2019 15:11:05 UTC+1, Maurice wrote: We have a hot-water cylinder with 2 immersion heaters. Is there such a mains unit that would provide for 2 inputs, and offer a 3- way choice of: As well as the manual bath/shower switch MK K5207WHI mentioned by Tuffnell Park below, economy 7 controllers like https://www.electricaldirect.co.uk/p...control-556045 will do the bottom heater on timed (which can be adjusted using tappets behind the clockface) and the top heater on boost, but not simultaneously. Thanks for doing my research for me:-) Tonight's job when I got in was to have a look for one of those. Thanks -- Adam |
#8
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
A good old fashioned 16A socket after the on/off switch and 16A plugs on each heater?
|
#9
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
On Fri, 5 Jul 2019 14:11:03 +0000 (UTC), Maurice wrote:
At the moment each heater is separately connected, with the inherent danger that someone will try to switch BOTH on, with a consequent fuse overload. So "seprately connected" is to the far end of the same bit of 2.5 mm immersion heater radial wiring rather than the far end of two seperate 2.5 mm radials? The former is a bit of a bodge IMHO, prospective maximum load exceeds that capacity of the fixed wiring. If it really is that I'd run in another 2.5 mm radial if there is a spare way in the CU for it or upgrade the existing radial to 4 (6?) mm and change the MCB (presuambly or are you still on wired fuses at the CU?). -- Cheers Dave. |
#10
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
On Friday, 5 July 2019 21:38:54 UTC+1, Cynic wrote:
A good old fashioned 16A socket after the on/off switch and 16A plugs on each heater? 15A would be more than adequate, especially if of a good brand (MK until the 1980s) and a lot neater than a 16A ceeform. Or maybe you meant 15A? Council houses near me all had the immersion on an MK 15A socket. Owain |
#11
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
On 06/07/2019 09:10, Dave Liquorice wrote:
On Fri, 5 Jul 2019 14:11:03 +0000 (UTC), Maurice wrote: At the moment each heater is separately connected, with the inherent danger that someone will try to switch BOTH on, with a consequent fuse overload. So "seprately connected" is to the far end of the same bit of 2.5 mm immersion heater radial wiring rather than the far end of two seperate 2.5 mm radials? The former is a bit of a bodge IMHO, prospective maximum load exceeds that capacity of the fixed wiring. If it really is that I'd run in another 2.5 mm radial if there is a spare way in the CU for it or upgrade the existing radial to 4 (6?) mm and change the MCB (presuambly or are you still on wired fuses at the CU?). or a second run of 2.5mm with both connected to /one/ (uprated) MCB or fuse? I know some deprecate it but 2.5mm is cheaper than 4mm and may be easier to fit. -- Robin reply-to address is (intended to be) valid |
#12
Posted to uk.d-i-y
|
|||
|
|||
3-way immmersion heater electrical connection?
On Fri, 05 Jul 2019 16:34:59 +0100, Brian Gaff wrote:
Many systems use two heaters in one tank. Can the circuit be upgraded? Its not going to blow up after all. The main board has only a 16A breaker - not enough for 2 immersions on at same time. Ideally that would be updated to a higher rating, but that's a much bigger job than I'm looking for... Elsewhere I've been pointed at these: https://www.edwardes.co.uk/categorie...p-dp-for-dual- immersion-heaters https://www.electrical2go.co.uk/logi...ersion-heater- switch-with-neon.html - which would seem to fit the bill. Regards, -- /\/\aurice (Replace "nomail.afraid" by "bcs" to reply by email) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Way way...oh Way cool! Honda U3-x | Metalworking | |||
28mm connection - hose connection | UK diy | |||
Way- way way ot but I don't have a clue | Metalworking | |||
Immmersion Heater Switch | UK diy | |||
Water heater drain connection | Home Repair |