Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Replacement Balusters
We have a couple of missing balusters/spindles. They're 'square turned'
IOW a square section, about 40mm square at the widest. It hasn't really bothered us - I've been casually looking for years and have an eBay alert set up, but to no avail. Now it's coming up to time to sell the house and move on, I'd like to replace them. I had started to think these were unique to us and our neighbours when I came across this... https://tinyurl.com/y5cazrva ....which is an expired Isle-of-Wight-bay listing. They're identical, and we're near Reading, so obviously not unique. Getting them made would be expensive because of the square section and the two are different - one is from a horizontal run along a landing and the other is a shortened angled version from floor to underside of next flight. Anyone seen these around or have other suggestions? Cheers -- Clive |
#2
Posted to uk.d-i-y
|
|||
|
|||
Replacement Balusters
On 07/05/2019 13:32, Clive Arthur wrote:
We have a couple of missing balusters/spindles.Â* They're 'square turned' IOW a square section, about 40mm square at the widest. It hasn't really bothered us - I've been casually looking for years and have an eBay alert set up, but to no avail.Â* Now it's coming up to time to sell the house and move on, I'd like to replace them.Â* I had started to think these were unique to us and our neighbours when I came across this... https://tinyurl.com/y5cazrva ....which is an expired Isle-of-Wight-bay listing.Â* They're identical, and we're near Reading, so obviously not unique.Â* Getting them made would be expensive because of the square section and the two are different - one is from a horizontal run along a landing and the other is a shortened angled version from floor to underside of next flight. Anyone seen these around or have other suggestions? Cheers And how are these made, please? |
#3
Posted to uk.d-i-y
|
|||
|
|||
Replacement Balusters
In article ,
Clive Arthur wrote: ...which is an expired Isle-of-Wight-bay listing. They're identical, and we're near Reading, so obviously not unique. Getting them made would be expensive because of the square section and the two are different - one is from a horizontal run along a landing and the other is a shortened angled version from floor to underside of next flight. I had several broken or missing when I bought this Victorian house. Got a local woodworking shop to turn up some matching ones. Wasn't that expensive. 40 years ago. But have you checked local timber merchants? Several in London do supply this sort of spindle now. But may not be identical. Or a re-claim yard. -- *Sticks and stones may break my bones but whips and chains excite me* Dave Plowman London SW To e-mail, change noise into sound. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Replacement Balusters
On 07/05/2019 14:18, Dave Plowman (News) wrote:
In article , Clive Arthur wrote: ...which is an expired Isle-of-Wight-bay listing. They're identical, and we're near Reading, so obviously not unique. Getting them made would be expensive because of the square section and the two are different - one is from a horizontal run along a landing and the other is a shortened angled version from floor to underside of next flight. I had several broken or missing when I bought this Victorian house. Got a local woodworking shop to turn up some matching ones. Wasn't that expensive. 40 years ago. But have you checked local timber merchants? Several in London do supply this sort of spindle now. But may not be identical. Or a re-claim yard. Personally I would attempt to make them by hand, I reckon a decent enough replica could be made, I dont have a lathe. but its not the first time I have used my bench grinder to get rough shapes then sand by hand. |
#5
Posted to uk.d-i-y
|
|||
|
|||
Replacement Balusters
On 07/05/2019 13:32, Clive Arthur wrote:
We have a couple of missing balusters/spindles.Â* They're 'square turned' IOW a square section, about 40mm square at the widest. It hasn't really bothered us - I've been casually looking for years and have an eBay alert set up, but to no avail.Â* Now it's coming up to time to sell the house and move on, I'd like to replace them.Â* I had started to think these were unique to us and our neighbours when I came across this... https://tinyurl.com/y5cazrva ...which is an expired Isle-of-Wight-bay listing.Â* They're identical, and we're near Reading, so obviously not unique.Â* Getting them made would be expensive because of the square section and the two are different - one is from a horizontal run along a landing and the other is a shortened angled version from floor to underside of next flight. Anyone seen these around or have other suggestions? Not seen any like that before... however, some options: Make the missing ones - could be done on a bandsaw. Take a mould of an existing one in latex compound, then cast some replacements in resin. Draw one up in a modelling program and use a CNC router to produce them from timber. Buy a bulk pack of new spindles and replace the lot. (probably not that expensive if you are happy to fit them). Buy anything close ish and fix the missing ones - chances are any prospective purchaser will not notice, and even if they do, its unlikely to be a deal breaker. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#6
Posted to uk.d-i-y
|
|||
|
|||
Replacement Balusters
On Tue, 7 May 2019 15:25:29 +0100
John Rumm wrote: Make the missing ones - could be done on a bandsaw. I was thinking more of a router jig to rough it out, using a removed spindle as a template, with a bit of hand finishing on the smaller features. |
#7
Posted to uk.d-i-y
|
|||
|
|||
Replacement Balusters
On 07/05/2019 16:55, Rob Morley wrote:
On Tue, 7 May 2019 15:25:29 +0100 John Rumm wrote: Make the missing ones - could be done on a bandsaw. I was thinking more of a router jig to rough it out, using a removed spindle as a template, with a bit of hand finishing on the smaller features. Yup, you could certainly get the broad shape with a template and a guide bush. The smaller features would need touching up by hand or with a set of small cutters in the router working across the width rather than along the length. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Horizontal cable balusters | Home Repair | |||
Cleaning Liquid Nails off balusters | Home Repair | |||
iron balusters and epoxy | Woodworking | |||
Staircase balusters boarded over | UK diy | |||
Casting concrete balusters & explosion-proof fans | UK diy |