Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
BMC A series thermostat etc
Well, I finally got the old housing off, using a combination of brute force, pig ignorance and heat from a blow lamp. New one arrived and fitted. OK so far ... until the same thing happened at the other end, where the heater control valve sits on the head, at the back. The pipe just fell off, that spigot having disintegrated, too. Oh, and having disturbed the bottom radiator hose, that now leaks. Hey ho. New parts in the post. Trouble with older cars - you disturb something, and bits start failing. -- Graeme |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
BMC A Series - remove thermostat housing | UK diy | |||
Series, parallel, and series-parallel resistors - series parallel R.pdf | Electronic Schematics | |||
Bathtub, surround quandry...acrylic, fiberglass, Swanstone, Veritek, etc.etc.etc. | Home Repair | |||
BMC Cash register model CR280 | Electronics Repair | |||
Series II head mount to Series I ram? | Metalworking |