Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Heavy Duty Sealant Gun
Heads up Purchased today in Wiko (Ex Wilkinson) a heavy duty sealant gun for £6 http://www.wilko.com/fillers+sealant...n/invt/0427805 Its appears to be good quality It takes the short and long tubes of "stick like ****" etc. There is a blade in-build to the handle to cut the plastic nozzels On the side there is a pull around spike to pierce the tubes that have fixed nozzles. There is a soft grip on the handle -- mailto: news {at} admac {dot] myzen {dot} co {dot} uk |
#2
Posted to uk.d-i-y
|
|||
|
|||
Heavy Duty Sealant Gun
On Monday, 18 September 2017 20:35:10 UTC+1, alan_m wrote:
Heads up Purchased today in Wiko (Ex Wilkinson) a heavy duty sealant gun for £6 http://www.wilko.com/fillers+sealant...n/invt/0427805 Its appears to be good quality It takes the short and long tubes of "stick like ****" etc. There is a blade in-build to the handle to cut the plastic nozzels On the side there is a pull around spike to pierce the tubes that have fixed nozzles. There is a soft grip on the handle Much lighter built than Cox guns. NT |
#3
Posted to uk.d-i-y
|
|||
|
|||
Heavy Duty Sealant Gun
|
#4
Posted to uk.d-i-y
|
|||
|
|||
Heavy Duty Sealant Gun
alan_m wrote:
On 19/09/2017 02:36, wrote: Much lighter built than Cox guns. The handle/trigger mechanism on the Wilko gun is cast rather than pressed sheet. The plunger release mechanism has a latching function to immediately release the pressure on the canister. Just momentary press the plunger release (without pulling back the plunger) and the plunger is completely free until put under pressure again with the trigger. It is made in China. Having just done a Google search on Cox guns their comparable gun (subjectively viewing pictures and the description on the Cox site) is x3 the price. I much prefer a skeleton design, just look stronger with less weight and bulk, and I have seen a cheap one of the open design bend like a banana. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wagner Power Products 283022 HT 775 1,680-Watt Heavy Duty Heat Gun | Woodturning | |||
DEWALT D51430 Heavy-Duty 1-Inch to 2-Inch 16-Gauge 7/16-inch Medium Crown Stapler | Home Ownership | |||
Wiring a Heavy Duty Push-Botton Swith | Metalworking | |||
How Do I Use a Heavy Duty Redidriva | UK diy | |||
Heavy Duty rotary table | Metalworking |