Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Can't open my old PVC front door (gearbox seems shot). Help!
Hello friends,
My old UPVC front door won't open, as of this morning. The key turns forever, but it is not releasing the lock. It has a multipoint espagnolette lock with 4x mushroom studs, very much like the one in the link below, but perhaps a different make: http://tinyurl.com/jxlj9qt The gearbox may have worn out. Is there any way to get it unlocked without destroying the door? It looks as though the hinges could be released by removing the pin from each, but I'm not sure if that will help, because the mushroom studs will still be engaged at the lock side. If all else fails, I may be able to get hold of a replacement used door, complete with frame and lock. So if I can't get this jammed door open, I guess I'll have to cut the frame out with a stone cutter and replace the whole door. However, I really hope that won't be necessary. Many thanks for any help here! JD |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
garage door lift cable loosens as door reaches fully open height | Home Repair | |||
front and back end problems of ACA solved by open source zerocost programs | Metalworking | |||
Painting Front Door/New Door Lockset | Home Repair | |||
upvc front door won't open or lock | UK diy | |||
Router table - open or closed front? | Woodworking |