I need to inspect (and probably change) the hinges but I can't get the
damn door apart. I've removed the 2 screws at the bottom, so can open-up
the bottom, but there aren't any other screws (except those attaching
the hinges) and I can't see what's holding the top edge. I presume it's
a clip but I can't get the front and back to slide in either direction.
Help!

wrote in message ...

I need to inspect (and probably change) the hinges but I can't get the
damn door apart. I've removed the 2 screws at the bottom, so can open-up
the bottom, but there aren't any other screws (except those attaching
the hinges) and I can't see what's holding the top edge. I presume it's
a clip but I can't get the front and back to slide in either direction.
Help!

http://www.howtomendit.com/answers.php?id=312582

On 09/10/2016 20:09, wrote:
I need to inspect (and probably change) the hinges but I can't get the
damn door apart. I've removed the 2 screws at the bottom, so can open-up
the bottom, but there aren't any other screws (except those attaching
the hinges) and I can't see what's holding the top edge. I presume it's
a clip but I can't get the front and back to slide in either direction.
Help!

Had a look in case it was like our Bosch oven (it isn't - ours has a
visible clip) all the manual says is, "Grip the door glass near the
hinges, pull up and remove"
Really helpful

On 09/10/2016 20:21, Richard wrote:
wrote in message ...

I need to inspect (and probably change) the hinges but I can't get the
damn door apart. I've removed the 2 screws at the bottom, so can
open-up the bottom, but there aren't any other screws (except those
attaching the hinges) and I can't see what's holding the top edge. I
presume it's a clip but I can't get the front and back to slide in
either direction. Help!

http://www.howtomendit.com/answers.php?id=312582

Thanks! Easy when you know, like most things, but I don't understand why
my searches didn't find that.

On 09/10/2016 20:27, Lee wrote:
On 09/10/2016 20:09, wrote:
I need to inspect (and probably change) the hinges but I can't get the
damn door apart. I've removed the 2 screws at the bottom, so can open-up
the bottom, but there aren't any other screws (except those attaching
the hinges) and I can't see what's holding the top edge. I presume it's
a clip but I can't get the front and back to slide in either direction.
Help!

Had a look in case it was like our Bosch oven (it isn't - ours has a
visible clip) all the manual says is, "Grip the door glass near the
hinges, pull up and remove"
Really helpful



That turns out to be the answer - once the inner panel is unclipped the
screws become visible.