Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Hello All
Just learned the connector sizes for shower pumps are 15mm (screwfix don't print 'em, only by searching for spec sheets I found out BEFORE I ordered the pipe). I was going to do the run from the HW and CW tanks in 22mm before and after the pump to the shower - but if the pump is only 15mm, is it worth it? Am I better advised to run the whole run (some 10M) in the smaller size? -- Simon Avery, Dartmoor, UK uk.d-i-y FAQ: http://www.diyfaq.org.uk/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Shower pump, whole bathroom? | UK diy | |||
shower pump in loft problem advice required | UK diy | |||
Shower Pump start as a result of other taps | UK diy | |||
Routing waste pipe past shower tray | UK diy | |||
Connecting jets, shower arm direct to pipe | UK diy |