Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Steel disk of 50mm
I'm trying to source a steel disk of 50mm or slightly greater where I
can weld a nut in the centre and retains an element of rigidity. I'm currently using: http://www.screwfix.com/p/deta-galva...ck-of-10/1946j really its too large a diameter though not a serious issue but is too thin where it distorts badly whilst welding a nut in the centre. Are there any off-the-shelf sources I can obtain a couple of these that are 2-3mm thick? I've run out of ideas! -- Mike Perkins |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Air admittence valve - get away with 50mm? | UK diy | |||
LV Downlights 50mm dia. | UK diy | |||
Steel disk source | Metalworking | |||
3x2 50mm flags | UK diy | |||
Cutting a 4" disk out of 1" steel plate | Metalworking |