UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 805
Default Electrical conundrum - mains aircon in motor home

This first post is a place holder in part, so that I don't forget to ask
the question, as I usually do once I get involved in stuff during the day.

The Motor Home has mains powered habitation air conditioning - that is an
ELectrolux slug on the roof.

So for it to work you need to be on a site with mains electricity.

There is also the issue of the power surge on start-up compared to the
power demand on normal running.

What I would like to be able to do:

(1) Run the A/C whilst driving - that would I assume involve an inverter
which could take power through the 12V electrics buffered by the
habitation batteries (unless the demand needs a direct connection to the
alternator charging circuit instead of via the charge controller which
charges the habitation batteries). This also allows starting the engine,
firing up A/C and then stopping the engine and letting the A/C run on
using the habitation batteries.

(2) Run the A/C when away from mains power - using a small Honda generator
which might be able to meet most of the demand apart from start-up. I am
envisaging perhaps the generator pushing power into the system whilst the
A/C takes power out so that the use of habitation battery charge is
slowed. This probably equates to running a UPS (that is, power in to UPS
for charging, power always out of UPS for running the device) and using a
small generator to keep feeding some power into the UPS during a power
cut. The generator may not fully meet the power demand but it slows the
rate of discharge.

This does seem to demand a lot of inefficiency, though, potentially with
the generator input being converted from 240V to 12V then back again. It
would be nicer if the battery 12V power could be used to boost the 240V
input from the generator so that most of the power comes directly in at
240V.


Bottom line is that one way may require blending two 240V inputs into a
single output, with obvious (I think) requirements to lock the wave forms
of the 240V together.

If I can manage ASCII art:

12V - 240V - Blender - A/C
240V -----------^

I think this is probably not realistic because you would have to prevent
back flow which is why there are so many issues with combining power
inputs connected to the grid. Then again, it is only like combining a
solar panel and mains (but that does allow back flow into the grid).

I need to dig out the handbook for the A/C to check all the power demands,
but meanwhile does this sound in any way feasible?

I know (2) could be met by just buying a bigger generator, but I bought
the little Honda because I could just shoehorn it into the available
storage and anything bigger is too tall/wide to fit anywhere usable.

Cheers


Dave R


--
Windows 8.1 on PCSpecialist box
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Home aircon repair jaycee[_2_] Home Repair 7 June 5th 09 11:55 PM
Lathe Motor Replacement Conundrum N Hurst Woodworking 10 September 12th 08 02:19 PM
OT Electrical Conundrum DonkeyHody Woodworking 48 January 7th 07 03:13 PM
Electrical conundrum NikV UK diy 5 September 17th 06 02:38 AM
Dishwasher electrical conundrum stu UK diy 4 December 31st 04 01:21 PM


All times are GMT +1. The time now is 10:14 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"