UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 204
Default Disc cutters

Anyone heard anything about the new regs on the use disc cutters, all have to have water feeds to stop the emitance of silica dust.
  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 204
Default Disc cutters

On Monday, September 17, 2012 9:30:56 PM UTC+1, Kipper at sea wrote:
Anyone heard anything about the new regs on the use of disc cutters; all have to have water feeds to stop the emittance of silica dust

  #3   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 39,563
Default Disc cutters

Kipper at sea wrote:
On Monday, September 17, 2012 9:30:56 PM UTC+1, Kipper at sea wrote:
Anyone heard anything about the new regs on the use of disc cutters; all have to have water feeds to stop the emittance of silica dust


No.


--
Ineptocracy

(in-ep-toc-ra-cy) €“ a system of government where the least capable to
lead are elected by the least capable of producing, and where the
members of society least likely to sustain themselves or succeed, are
rewarded with goods and services paid for by the confiscated wealth of a
diminishing number of producers.
  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 6,938
Default Disc cutters

In message , The Natural Philosopher
writes
Kipper at sea wrote:
On Monday, September 17, 2012 9:30:56 PM UTC+1, Kipper at sea wrote:
Anyone heard anything about the new regs on the use of disc cutters;
all have to have water feeds to stop the emittance of silica dust


No.


Likewise. However, stone saws (mine anyway) have provision for water to
be fed to the blade.

Fine for block cutting but my suspicion is that it degrades modestly
priced diamond blades when cutting concrete.

--
Tim Lamb
  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 173
Default Disc cutters

On 18/09/2012 08:41, Tim Lamb wrote:
In message , The Natural Philosopher
writes
Kipper at sea wrote:
On Monday, September 17, 2012 9:30:56 PM UTC+1, Kipper at sea wrote:
Anyone heard anything about the new regs on the use of disc cutters;
all have to have water feeds to stop the emittance of silica dust


No.


Likewise. However, stone saws (mine anyway) have provision for water to
be fed to the blade.

Fine for block cutting but my suspicion is that it degrades modestly
priced diamond blades when cutting concrete.


Some 'professionals' I've seen recently were making such a half-hearted
attempt with the water I don't know why they bothered. Passers-by still
had no option but to breathe in the dust.


  #6   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 204
Default Disc cutters

On Monday, September 17, 2012 9:30:56 PM UTC+1, Kipper at sea wrote:
Anyone heard anything about the new regs on the use disc cutters, all have to have water feeds to stop the emitance of silica dust.


Changes to approved methods of roof tile cutting to protect against silica dust.
From 1st October 2012, contractors will no longer have the option of using a cut-off saw to dry cut valley tiles.

Industry has supported changes to working methods which mean that, should a cut-off saw be used for cutting valley tiles, water suppression as well as the correct Respiratory Protection Equipment (RPE) will also be expected. This is in line with the controls currently in use for cutting tiles in other sections of the roof.

These changes result from recent work by HSE to monitor the exposure of roofers to silica dust which showed that the levels of silica dust created when dry cutting valley tiles are much higher than published safety limits. This means that a high standard of control is needed to reduce the risks from silica dust.

Silica is a natural mineral present in large amounts in many construction materials like concrete roof tiles. Common tasks such as cutting break the silica into very fine dust (Respirable Crystalline Silica or RCS). Regularly breathing in RCS can cause serious lung disease like silicosis and lung cancer.
  #7   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 5,386
Default Disc cutters

On Fri, 21 Sep 2012 20:54:54 +0100, Kipper at sea
wrote:

On Monday, September 17, 2012 9:30:56 PM UTC+1, Kipper at sea wrote:
Anyone heard anything about the new regs on the use disc cutters, all
have to have water feeds to stop the emitance of silica dust.


Changes to approved methods of roof tile cutting to protect against
silica dust.
From 1st October 2012, contractors will no longer have the option of
using a cut-off saw to dry cut valley tiles.
Industry has supported changes to working methods which mean that,
should a cut-off saw be used for cutting valley tiles, water suppression
as well as the correct Respiratory Protection Equipment (RPE) will also
be expected. This is in line with the controls currently in use for
cutting tiles in other sections of the roof.
These changes result from recent work by HSE to monitor the exposure of
roofers to silica dust which showed that the levels of silica dust
created when dry cutting valley tiles are much higher than published
safety limits. This means that a high standard of control is needed to
reduce the risks from silica dust.
Silica is a natural mineral present in large amounts in many
construction materials like concrete roof tiles. Common tasks such as
cutting break the silica into very fine dust (Respirable Crystalline
Silica or RCS). Regularly breathing in RCS can cause serious lung
disease like silicosis and lung cancer.


Seems popcorn can also cause serious lung disease.

http://www.guardian.co.uk/world/2012...?newsfeed=true

So don't go to the cinema at the weekend after a hard week of tile
cutting...

--
Rod
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stationary Disc Sander - Shopsmith Steel Disc Good Enough toUse? J T Woodworking 0 May 8th 07 05:37 AM
Clock Cutters - Wow! (Was: GEAR CUTTERS!!!! - Who was asking?) Airy R.Bean Metalworking 0 January 26th 05 10:28 AM
how to sharpen mini dike cutters, nipper cutters? Jon Elson Metalworking 17 January 10th 04 06:52 AM
how to sharpen mini dike cutters, nipper cutters? Asimov Electronics Repair 0 December 30th 03 03:02 PM
how to sharpen mini dike cutters, nipper cutters? Ken G. Electronics Repair 0 December 28th 03 06:19 PM


All times are GMT +1. The time now is 09:46 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"