Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
T-nuts
The pillar-drill thread finally prompted me to get some T-nuts (the sort
that slide in a slot, not the spiky ones) so I can fix my little vice/clamp properly to the pillar-drill's table. I was surprised to find the nuts weren't tapped all the way through. The supplier said they are all like that, so the bolts have to be exactly the right length. Is that true? It means the bolts have to be pretty-much exactly the right length. -- Reentrant |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT - Lug nuts | Home Repair | |||
Jam nuts, locking nuts | Metalworking | |||
nuts with nylon inserts versus lock washers and jamb nuts | Home Repair | |||
The MI5 guy and other nuts | Home Repair | |||
RIGHT WING NUTS vastly outnumber LEFT WING NUTS . | Metalworking |