Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Soft close damper (Hafele)
Hi,
Looking at a soft close damper for kitchen cabinet doors. Example: http://comptools.co.uk/product_info....oducts_id=8388 The page says "Must be fitted 10-15 mm from hinge side in the cabinet". What does it say/mean? Where would you position the damper assuming hinges are on a vertical side? TIA Charles |
#2
Posted to uk.d-i-y
|
|||
|
|||
Soft close damper (Hafele)
On 2010-10-22, Charles C wrote:
Hi, Looking at a soft close damper for kitchen cabinet doors. Example: http://comptools.co.uk/product_info....oducts_id=8388 The page says "Must be fitted 10-15 mm from hinge side in the cabinet". What does it say/mean? Where would you position the damper assuming hinges are on a vertical side? On the inside upper edge of the door frame. ______________________ I O | I | I | H--- | I | I | I | I | H--- | I | I | I | ---------------------- Where the "O" is in that picture. You can either screw the bracket into the bottom of the top face of the cabinet, or if the cabinet is suitably constructed, bore a hole into the front edge of the top face of the cabinet. -- Jón Fairbairn http://www.chaos.org.uk/~jf/Stuff-I-dont-want.html (updated 2010-09-14) |
#3
Posted to uk.d-i-y
|
|||
|
|||
Soft close damper (Hafele)
Jón Fairbairn said the following on 23/10/2010 15:28:
On 2010-10-22, Charles wrote: Hi, Looking at a soft close damper for kitchen cabinet doors. Example: http://comptools.co.uk/product_info....oducts_id=8388 The page says "Must be fitted 10-15 mm from hinge side in the cabinet". What does it say/mean? Where would you position the damper assuming hinges are on a vertical side? On the inside upper edge of the door frame. ______________________ I O | I | I | H--- | I | I | I | I | H--- | I | I | I | ---------------------- Where the "O" is in that picture. You can either screw the bracket into the bottom of the top face of the cabinet, or if the cabinet is suitably constructed, bore a hole into the front edge of the top face of the cabinet. Brilliant, thank you. Charles |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
At what point can you close the damper on a fireplace? | Home Repair | |||
Soft Close Hinges | UK diy | |||
Air Tight Damper? Or close to it? | Home Repair | |||
fireplace damper set to not close | Home Repair | |||
"soft-close" drawer glides | Woodworking |