Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
drain pipe angle
I'm thinking of putting in some drainage for the guttering (and outside tap) at one end of our house - currently it all just spills out across part of the lawn / driveway, and it'd be nice to route it under the drive and into the woodland beyond. Is there some kind of minimum recommended angle for such pipework so that it'll stand a reasonable chance of doing the job without quickly silting up? (I can't remember what I did for the guttering now, although 1" drop every 6' rings a bell) I'll probably use 3" pipe if I can find* any (currently the only stuff I've seen is flexible 'corrugated' stuff which seems like it's just asking for trouble) and hopefully the slope is enough that I can have it come out into the woods above ground so I don't need any kind of fancy soakaway... * I'm in the US these days, and nobody here really 'does' drainage of rainwater... cheers Jules |
#2
Posted to uk.d-i-y
|
|||
|
|||
drain pipe angle
Underground drainage is usually 1 in 40. In the UK you would be
required to use 4" pipe and possibly cover with or encase in concrete if there was a risk of damage from vehicles crossing above. |
#3
Posted to uk.d-i-y
|
|||
|
|||
drain pipe angle
On Tue, 04 Aug 2009 13:09:24 -0700, RubberBiker wrote:
Underground drainage is usually 1 in 40. Ta In the UK you would be required to use 4" pipe and possibly cover with or encase in concrete if there was a risk of damage from vehicles crossing above. Yep - still at the ideas phase; I do need to protect with *something* as vehicles will be going over the top (the worst probably being when the truck comes for LPG delivery) - not frequently, but still... I had wondered about a brick/concrete drainage channel covered with metal grating, as that could be right at surface level and also much easier to clean, but I've not found a source of suitable grating yet (I *could* make by chopping / welding 3/4" metal rod, but that's some major work) cheers Jules |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
angle cutting small pipe | Metalworking | |||
Shower Drain Strainer Won't Fit, Part II -- How to Remove a SmallLength of a Drain Pipe? | Home Repair | |||
Leaking Pipe - need to drain water.(GCH pipe) need some advice. | UK diy | |||
Plumbing question: getting piece of broken pipe out of drain pipe | Home Repair | |||
fall angle of soil pipe | UK diy |