UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 299
Default Further comments on BAXI Barcelona (fault)

About 2 weeks ago I posted a comment about unreliability of Baxi Barcelona
(3 logic boards in 5 years)

After 2 weeks of running OK with latest board ... had a problem occur twice
in last few days anybody help.


Boiler stops working .... removing the front lower cover, shows the
'overheat/lockout' red LED is illuminated.

Turning the boiler 'off' with the thermostat on/off switch .... and then
back on again, puts boiler through a reset and all works again for a few
days.

All works OK ... plenty of output, and DHW and heating worked fine for
several days, then it happened again.


In fault condition ... Main LED is ON, and not flashing.
Lock out LED is on and not flashing
From manual this suggest 'Ignition Lockout' has occurred.

As it 'resets' and then works OK, is this likely to be another fault logic
board ?

  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,231
Default Further comments on BAXI Barcelona (fault)

On Sun, 30 Nov 2008 17:34:09 +0000, Rick Hughes wrote:

About 2 weeks ago I posted a comment about unreliability of Baxi
Barcelona (3 logic boards in 5 years)

After 2 weeks of running OK with latest board ... had a problem occur
twice in last few days anybody help.


Boiler stops working .... removing the front lower cover, shows the
'overheat/lockout' red LED is illuminated.

Turning the boiler 'off' with the thermostat on/off switch .... and
then back on again, puts boiler through a reset and all works again for
a few days.

All works OK ... plenty of output, and DHW and heating worked fine for
several days, then it happened again.


In fault condition ... Main LED is ON, and not flashing. Lock out LED is
on and not flashing
From manual this suggest 'Ignition Lockout' has occurred.

As it 'resets' and then works OK, is this likely to be another fault
logic board ?


It could just be an intermittent ignition problem. Also note that the poor
ignition lead on this model does three things. Ignite, flame sense,
condensate blockage.The latter feature seems to have been taken away on
some models.


--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html
Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Baxi Barcelona .. unreliable Ed Sirett UK diy 15 November 30th 08 12:09 PM
Baxi Barcelona .. unreliable Dave Plowman (News) UK diy 3 November 26th 08 10:38 AM
Baxi Barcelona .. unreliable Peter Parry UK diy 3 November 25th 08 08:31 PM
Baxi Barcelona .. unreliable Doctor Drivel[_2_] UK diy 0 November 25th 08 05:11 PM
Baxi Barcelona - leaks Peter Hemmings UK diy 3 October 27th 03 08:37 PM


All times are GMT +1. The time now is 07:38 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"