Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
ping roger mills
Thanks, I got the e mail of the controller, but unfortunately, it has
disappeared from my computer (I am running some experimental software and that might have squirreled the posts away. Don't worry, I have printed the 4 sections out and I will copy them later for back up. Many thanks again Dave |
#2
Posted to uk.d-i-y
|
|||
|
|||
ping roger mills
In an earlier contribution to this discussion,
Dave wrote: Thanks, I got the e mail of the controller, but unfortunately, it has disappeared from my computer (I am running some experimental software and that might have squirreled the posts away. Don't worry, I have printed the 4 sections out and I will copy them later for back up. Many thanks again Dave That's fine - glad to be of help! -- Cheers, Roger ______ Email address maintained for newsgroup use only, and not regularly monitored.. Messages sent to it may not be read for several weeks. PLEASE REPLY TO NEWSGROUP! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ping Roger Kissel | Metalworking | |||
Cheep Face Mills / Indexable End Mills? | Metalworking | |||
Ping Roger/Frank From Momentum | Metalworking | |||
face mills/shoulder mills | Metalworking | |||
ATTN: Roger Mills (or any other CH/HW gurus) | UK diy |