UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 121
Default Part P says you can replace a single circuit

http://www.waverley.gov.uk/buildingcontrol/partp.asp

So switch off circuit.
Cut though wire.
Circuit now damaged.
Replace, with new sockets etc as required.

If a ring main is replaced over a few years...

--

  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 25,191
Default Part P says you can replace a single circuit

zaax wrote:
http://www.waverley.gov.uk/buildingcontrol/partp.asp

So switch off circuit.
Cut though wire.
Circuit now damaged.
Replace, with new sockets etc as required.


You can extend an existing circuit with new sockets etc anyway. So no
need to go cutting cables.

If a ring main is replaced over a few years...


Tis fine, just you can't (in theory) install a new one.

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/
  #3   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 20
Default Part P says you can replace a single circuit


"John Rumm" wrote in message
...
zaax wrote:
http://www.waverley.gov.uk/buildingcontrol/partp.asp

So switch off circuit. Cut though wire. Circuit now damaged.
Replace, with new sockets etc as required.


You can extend an existing circuit with new sockets etc anyway. So no need
to go cutting cables.

If a ring main is replaced over a few years...


Tis fine, just you can't (in theory) install a new one.

--
Cheers,

John.


Who is ever going to know unless you take out a full page advert in the
national newspapers?
Who even cares?


  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 283
Default Part P says you can replace a single circuit

Who is ever going to know unless you take out a full page advert in the
national newspapers?


dont you need an electrical test certificate
when you're selling a house these days,
which would fail if I rewire my bathroom and kitchen?
and should we use the new colours of wire?

george

--


  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 25,191
Default Part P says you can replace a single circuit

George (dicegeorge) wrote:
Who is ever going to know unless you take out a full page advert in the
national newspapers?


dont you need an electrical test certificate
when you're selling a house these days,


Not as such AFAIK (unless a HIP requires one).

If you disclosed that recent work has been done on the place then they
may take more interest. Having said that the standard sellers forms
allow for the possibility that paperwork is "lost".

which would fail if I rewire my bathroom and kitchen?


Why would a test fail if you have done the work correctly? (or am I
missing your point)

and should we use the new colours of wire?


Yes, why not.

The colours don't date work as pre or post part pee anyway since new
colours were allowable before, and old colours allowable after.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/


  #6   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,988
Default Part P says you can replace a single circuit

On Mon, 21 Jan 2008 21:52:52 -0000, "George \(dicegeorge\)"
wrote:

dont you need an electrical test certificate
when you're selling a house these days,
which would fail if I rewire my bathroom and kitchen?


Why should it fail? If you do the job correctly you'll likely get a
better result than so-called 'professionals', simply because you know
that you are doing the job for your own benefit and safety rather than
as a money-making venture, so you will use decent quality
wire/cable/accessories/miscellaneous 'bits and pieces', and follow the
relevant legislation.

If someone has to test it, it makes no difference at all who carried
out the work. As long as it's a 'satisfactory' installation the
certificate will (should!) be forthcoming.

and should we use the new colours of wire?


Colours of the wires don't affect safety.

Regarding selling a house as you mention, forget that you intend to
sell, treat the house as your own and develop it accordingly, then you
have nothing to hide from a potential purchaser.

--
Frank Erskine
Sunderland
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wiring a 480V Single Phase Circuit Joshua Home Repair 58 June 8th 20 02:39 PM
do i need to replace a single roof shingle? sfmcfar Home Repair 10 February 24th 07 01:31 PM
Replace dual AC Capacitor with 2 single cap's Puddin' Man Home Repair 5 September 18th 05 08:50 PM
small 'bulging bay windows' for plants, to replace single hung window,called what? dave Home Repair 3 July 19th 05 06:18 PM
Ring circuit form a single cable? Sparks UK diy 35 March 31st 05 09:18 AM


All times are GMT +1. The time now is 09:43 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"