Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
BS2879 Drain Cock - Washers
Each of my 12 radiators is plumbed using the Maxtwin valves (two 8mm piles
to a double coaxial valve at one end of the radiator) - the opposite end has a draincock. When I decorate I like to remove the radiator but I am finding that the washers in the draincocks are in a bad state. I have tried to buy some new ones but no success. I reckon they are 14mm outside diameter + 4mm hole and 2.5mm thick. Any ideas on a source - I would like to have some in hand. |
#2
Posted to uk.d-i-y
|
|||
|
|||
BS2879 Drain Cock - Washers
On Thu, 18 Oct 2007 15:38:09 +0000, John wrote:
I have tried to buy some new ones but no success. I reckon they are 14mm outside diameter + 4mm hole and 2.5mm thick. Any ideas on a source - I would like to have some in hand. Toolstation list some drain-off cock washers though they don't give dimensions. Plumber's merhants may be able to supply. -- John Stumbles What do you mean, talking about it isn't oral sex? |
#3
Posted to uk.d-i-y
|
|||
|
|||
BS2879 Drain Cock - Washers
John wrote:
snip Blimey, thought it was another missive from the lady with the dirty dirty mouth... David |
#4
Posted to uk.d-i-y
|
|||
|
|||
BS2879 Drain Cock - Washers
On Thu, 18 Oct 2007 15:38:09 +0000, John wrote:
Each of my 12 radiators is plumbed using the Maxtwin valves (two 8mm piles to a double coaxial valve at one end of the radiator) - the opposite end has a draincock. When I decorate I like to remove the radiator but I am finding that the washers in the draincocks are in a bad state. I have tried to buy some new ones but no success. I reckon they are 14mm outside diameter + 4mm hole and 2.5mm thick. Any ideas on a source - I would like to have some in hand. Rubber and fibre washers for drain cocks seem to be available at real plumbers' merchants. (I.E. Not at "sheds" or PlumbCentere etc.) -- Ed Sirett - Property maintainer and registered gas fitter. The FAQ for uk.diy is at http://www.diyfaq.org.uk Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stuck drain cock | UK diy | |||
Drain cock replacement?? | UK diy | |||
Stuck drain cock on DHW | UK diy | |||
CH drain cock leaking | UK diy | |||
Drain cock | UK diy |