Beveled edge kitchen cupboard doors.
Require 12mm hole for hinge thing. Door is 18mm until you get to the
bevel when it's less. Comes very close to the front.
OH says there's a router bit that cost 45 quid that'll do it easily -
is this the best way to go?
All suggestions welcome. Thanks
--
http://www.orderonlinepickupinstore.co.uk
Ah fetch it yourself if you can't wait for delivery
http://www.freedeliveryuk.co.uk
Or get it delivered for free

"Mogga" wrote in message
...
Beveled edge kitchen cupboard doors.
Require 12mm hole for hinge thing. Door is 18mm until you get to the
bevel when it's less. Comes very close to the front.
OH says there's a router bit that cost 45 quid that'll do it easily -
is this the best way to go?
All suggestions welcome. Thanks
--
http://www.orderonlinepickupinstore.co.uk
Ah fetch it yourself if you can't wait for delivery
http://www.freedeliveryuk.co.uk
Or get it delivered for free

Tricky.

I bought some cupboard doors from srewy,five of them had to be taken back as
the door hinges recess was so finely near the outer facia, when closing of
the hinge put a bit of pressure on the laminate and split it revealing the
round drilled out hole were the hinge sits in.

Mogga wrote:
Beveled edge kitchen cupboard doors.
Require 12mm hole for hinge thing. Door is 18mm until you get to the
bevel when it's less. Comes very close to the front.
OH says there's a router bit that cost 45 quid that'll do it easily -
is this the best way to go?
All suggestions welcome. Thanks
--
http://www.orderonlinepickupinstore.co.uk
Ah fetch it yourself if you can't wait for delivery
http://www.freedeliveryuk.co.uk
Or get it delivered for free

http://www.screwfix.com/app/sfd/cat/...11596&ts=42720

I've used one of these with bevelled edge doors. As long as you
remember to stop in time, they work fine.

Cheaper version at http://www.toolstation.com/index.html?code=10599 -
probably not as long lasting, but should do a one off.

A

On Sun, 29 Jul 2007 14:01:16 -0700, "
wrote:


Mogga wrote:
Beveled edge kitchen cupboard doors.
Require 12mm hole for hinge thing. Door is 18mm until you get to the
bevel when it's less. Comes very close to the front.
OH says there's a router bit that cost 45 quid that'll do it easily -
is this the best way to go?
All suggestions welcome. Thanks
--
http://www.orderonlinepickupinstore.co.uk
Ah fetch it yourself if you can't wait for delivery
http://www.freedeliveryuk.co.uk
Or get it delivered for free

http://www.screwfix.com/app/sfd/cat/...11596&ts=42720

I've used one of these with bevelled edge doors. As long as you
remember to stop in time, they work fine.


Thanks - I've told OH about it
It's a shame we couldn't find any plain doors that didn't have a bevel
(Ok there are those very shiny ones that look far too modern)


Cheaper version at http://www.toolstation.com/index.html?code=10599 -
probably not as long lasting, but should do a one off.

A
--
http://www.orderonlinepickupinstore.co.uk
Ah fetch it yourself if you can't wait for delivery
http://www.freedeliveryuk.co.uk
Or get it delivered for free