UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1
Default weatherproofing and insulation

Hi there

I have a situation where I am creating an outdoor terrace at 2nd floor
level. This means that a previously internal wall (plasterboard stud
wall) will form one edge of the terrace, so it will be outside. My
question is this: would it be better to construct a whole new wall, or
could the existing wall be weatherproofed an insulated in some way so
that it would not mind one side of it being outside? Any comments or
help would be welcomed. Thanks.

  #2   Report Post  
Posted to uk.d-i-y
TMC TMC is offline
external usenet poster
 
Posts: 406
Default weatherproofing and insulation


wrote in message
ups.com...
Hi there

I have a situation where I am creating an outdoor terrace at 2nd floor
level. This means that a previously internal wall (plasterboard stud
wall) will form one edge of the terrace, so it will be outside. My
question is this: would it be better to construct a whole new wall, or
could the existing wall be weatherproofed an insulated in some way so
that it would not mind one side of it being outside? Any comments or
help would be welcomed. Thanks.


New wall


  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,688
Default weatherproofing and insulation



On 29 Jan, 09:22, Stuart Noble
wrote:
wrote:
Hi there


I have a situation where I am creating an outdoor terrace at 2nd floor
level. This means that a previously internal wall (plasterboard stud
wall) will form one edge of the terrace, so it will be outside. My
question is this: would it be better to construct a whole new wall, or
could the existing wall be weatherproofed an insulated in some way so
that it would not mind one side of it being outside? Any comments or
help would be welcomed. Thanks.I suppose you could replace the outer plasterboard with Aquapanel.

Similar products are used to clad modern buildings


Replace the outer panel (or board over it) with a general purpose
external cement board like viroc etc (aquapanel is funny stuff and
very brittle), then render. A common building technique when filling
in an external doorway etc, is to board with viroc, render and maybe
pebbledash. Much quicker than building a block wall, and lighter.
Simon.

  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 9,045
Default weatherproofing and insulation

Stuart Noble wrote:
wrote:
Hi there

I have a situation where I am creating an outdoor terrace at 2nd floor
level. This means that a previously internal wall (plasterboard stud
wall) will form one edge of the terrace, so it will be outside. My
question is this: would it be better to construct a whole new wall, or
could the existing wall be weatherproofed an insulated in some way so
that it would not mind one side of it being outside? Any comments or
help would be welcomed. Thanks.


I suppose you could replace the outer plasterboard with Aquapanel.
Similar products are used to clad modern buildings


The way that my house was dione..and archtect and BCO approved, was a
constructuion of..

Plasterboard, foil lined.

6x3 studwork - gaps filled with rockwool (celotex better)

19mm water resistant ply

building paper - breathable splashproof membrane.

1x 1 1/2" batten over.. Drip bead nailed to lowest batten.

Expanded metal over that.

Two coats of render. I wish in some areas I had sealed that.

two coats of paint.

As I understand it the ply makes for a ove sideways.

The building paper is to stop any water that might get in from soaking
into the ply.

The battens form an airgap, that helps keep all the wood work dry.

The mesh and render coating is a stormproof coat that keeps the water
out. You could replace that with any cladding whose appearance was
suitable. Or indeed build a single brick wall outside the lot, keyed to
the ply by the simple expedient of driving big nails into the studs and
keying them into the mortar joints.

I strongly recommend the ply. It adds enormously to the overall strength.







Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Weatherproofing an often-used patio door Gingertoad Home Repair 4 November 13th 10 04:14 AM
Weatherproofing Corrugated Cardboard Art Todesco Home Repair 12 October 14th 06 01:19 AM
Weatherproofing MDF? John Emmons Woodworking 16 August 24th 06 04:25 AM
Weatherproofing a birdhouse Joe_Stein Woodworking 6 January 3rd 05 07:40 PM
weatherproofing new window installation ezalpha Home Repair 4 September 6th 03 12:17 PM


All times are GMT +1. The time now is 10:22 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"