Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Removed a radiator. Can I still use the central heating?
The subject contains my question! Removed a radiator as I've just got a room plastered. I'm going to replace the radiator once I've painted the room. The lockshield valve and a Drayton RT212 TRV valve are still in place.
Is it safe to use the heating while the radiator is missing? |
#2
Posted to uk.d-i-y
|
|||
|
|||
Removed a radiator. Can I still use the central heating?
"Dysanovic" wrote in message
news The subject contains my question! Removed a radiator as I've just got a room plastered. I'm going to replace the radiator once I've painted the room. The lockshield valve and a Drayton RT212 TRV valve are still in place. Is it safe to use the heating while the radiator is missing? -- Dysanovic Yes, assuming you have other radiators! Sparks... |
#3
Posted to uk.d-i-y
|
|||
|
|||
Removed a radiator. Can I still use the central heating?
In an earlier contribution to this discussion,
Dysanovic wrote: The subject contains my question! Removed a radiator as I've just got a room plastered. I'm going to replace the radiator once I've painted the room. The lockshield valve and a Drayton RT212 TRV valve are still in place. Is it safe to use the heating while the radiator is missing? Yes, provided you drained *only* the radiator and not the pipework, prior to removing it. How did you go about draining it? Be careful with the TRV - it may open and pee water out into the room if the weather gets cold, even when turned to its minimum setting. Ideally, you should remove the thermostatic head *before* draining the rad, and replace it with a screw-cap which should have been supplied with the valve for this very purpose. That will hold the pin firmly down whatever the temperature. Alternatively, find something which will screw onto the outlet (i.e. with the same thread as the radiator tail union) in order to seal it. -- Cheers, Roger ______ Email address maintained for newsgroup use only, and not regularly monitored.. Messages sent to it may not be read for several weeks. PLEASE REPLY TO NEWSGROUP! |
#4
Posted to uk.d-i-y
|
|||
|
|||
Removed a radiator. Can I still use the central heating?
Ideally, you should remove the thermostatic head *before* draining
the rad, and replace it with a screw-cap which should have been supplied with the valve for this very purpose. That will hold the pin firmly down whatever the temperature. Also, some designs feature a genuine "off", where you twist another quarter turn after passing the "0" frost setting. Christian. |
#5
Posted to uk.d-i-y
|
|||
|
|||
Removed a radiator. Can I still use the central heating?
"Christian McArdle" wrote in message .. . Ideally, you should remove the thermostatic head *before* draining the rad, and replace it with a screw-cap which should have been supplied with the valve for this very purpose. That will hold the pin firmly down whatever the temperature. Also, some designs feature a genuine "off", where you twist another quarter turn after passing the "0" frost setting. Christian. IF the valve doesn't have an 'OFF' position, place a penny under the thermostatic head and over the pin- then the * = Frost setting will positively close off the valve. -- Brian |
#6
Posted to uk.d-i-y
|
|||
|
|||
Removed a radiator. Can I still use the central heating?
In an earlier contribution to this discussion,
Brian Sharrock wrote: "Christian McArdle" wrote in message .. . Ideally, you should remove the thermostatic head *before* draining the rad, and replace it with a screw-cap which should have been supplied with the valve for this very purpose. That will hold the pin firmly down whatever the temperature. Also, some designs feature a genuine "off", where you twist another quarter turn after passing the "0" frost setting. Christian. IF the valve doesn't have an 'OFF' position, place a penny under the thermostatic head and over the pin- then the * = Frost setting will positively close off the valve. But bear in mind that fact the the radiator has *already* been removed - so removing the head at this stage in order to insert packing will result in the valve opening, and peeing forth lots of dirty brown water! -- Cheers, Roger ______ Email address maintained for newsgroup use only, and not regularly monitored.. Messages sent to it may not be read for several weeks. PLEASE REPLY TO NEWSGROUP! |
#7
Posted to uk.d-i-y
|
|||
|
|||
Removed a radiator. Can I still use the central heating?
Also bear in mind that now that you have the rad off the risk of the
TRV peeing forth water is unrelated to whether you use the heating or not, which was the original question. In fact using the heating is more likely to keep the temperature of the room above the point where the TRV will start to open. |
#8
|
|||
|
|||
I used central heating with a radiator removed. It worked fine for about 4-5 hours but now my Baxi Solo2 50PF boiler has stopped working ;( The fan is coming on but the pilot light is not igniting. One problem to the next
|
#9
Posted to uk.d-i-y
|
|||
|
|||
Removed a radiator. Can I still use the central heating?
Dysanovic wrote:
The subject contains my question! Removed a radiator as I've just got a room plastered. I'm going to replace the radiator once I've painted the room. The lockshield valve and a Drayton RT212 TRV valve are still in place. Is it safe to use the heating while the radiator is missing? if it ain't leaking, yes. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
underfloor heating undertile haeting | Home Repair | |||
Central Heating | UK diy | |||
CENTRAL HEATING..BOTH SWITCHES ON OR NOT? | UK diy | |||
Rayburn integrated into central heating | UK diy | |||
Central Heating costs + other questions | UK diy |