Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Potterton EP2002 CH Controller
Does anyone know how to remove an EP2002 from its fitting plate? There are
no obvious screws, catches etc. The contoller switches are wearing out, I've got a new CH contoller as suitable replacement but I need to know how to remove the EP2002 without damaging it. Thanks |
#2
Posted to uk.d-i-y
|
|||
|
|||
Potterton EP2002 CH Controller
In message , Jeremy Osborne
writes Does anyone know how to remove an EP2002 from its fitting plate? There are no obvious screws, catches etc. The contoller switches are wearing out, I've got a new CH contoller as suitable replacement but I need to know how to remove the EP2002 without damaging it. Thanks The screw is on the underside You then rotate the programmer upwards to remove it from the backplate -- geoff |
#3
Posted to uk.d-i-y
|
|||
|
|||
Potterton EP2002 CH Controller
Thanks for the reply, I'll take another look.
Jeremy |
#4
|
|||
|
|||
Quote:
I AM NEW TO HERE WANTED TO KNOW ABOUT THE SAME CONTROLLER. WAS PLEASED TO FIND THIS ON HERE BUT WHEN I CHECKED MY EP2002 THERE IS NO SCREWS UNDERNEATH. tHE ONLY THING THAT LOOKS LIKE A POSSIBILITY IS A SLOT UNDERNEATH BUT NO OBVIOUS WAY TO OPEN.aNY ONE CAN HELP WILL BE MUCH APPRECIATED. JOHN DONOVAN |
#5
Posted to uk.d-i-y
|
|||
|
|||
Potterton EP2002 CH Controller
In message , jdonovan
writes raden Wrote: In message , Jeremy Osborne writes Does anyone know how to remove an EP2002 from its fitting plate? There are no obvious screws, catches etc. The contoller switches are wearing out, I've got a new CH contoller as suitable replacement but I need to know how to remove the EP2002 without damaging it. Thanks The screw is on the underside You then rotate the programmer upwards to remove it from the backplate -- geoff I AM NEW TO HERE WANTED TO KNOW ABOUT THE SAME CONTROLLER. WAS PLEASED TO FIND THIS ON HERE BUT WHEN I CHECKED MY EP2002 THERE IS NO SCREWS UNDERNEATH. tHE ONLY THING THAT LOOKS LIKE A POSSIBILITY IS A SLOT UNDERNEATH BUT NO OBVIOUS WAY TO OPEN.aNY ONE CAN HELP WILL BE MUCH APPRECIATED. JOHN DONOVAN Actually I totally got it wrong there there is a clip behind that slot If you push it in with a screwdriver the programmer will release now all you have to do is sort your caps lock out -- geoff |
#6
Posted to uk.d-i-y
|
|||
|
|||
Potterton EP2002 CH Controller
On Wed, 29 Nov 2006 01:08:36 GMT, raden wrote:
In message , jdonovan writes raden Wrote: In message , Jeremy Osborne writes Does anyone know how to remove an EP2002 from its fitting plate? There are no obvious screws, catches etc. The contoller switches are wearing out, I've got a new CH contoller as suitable replacement but I need to know how to remove the EP2002 without damaging it. Thanks The screw is on the underside You then rotate the programmer upwards to remove it from the backplate -- geoff I AM NEW TO HERE WANTED TO KNOW ABOUT THE SAME CONTROLLER. WAS PLEASED TO FIND THIS ON HERE BUT WHEN I CHECKED MY EP2002 THERE IS NO SCREWS UNDERNEATH. tHE ONLY THING THAT LOOKS LIKE A POSSIBILITY IS A SLOT UNDERNEATH BUT NO OBVIOUS WAY TO OPEN.aNY ONE CAN HELP WILL BE MUCH APPRECIATED. JOHN DONOVAN Actually I totally got it wrong there there is a clip behind that slot If you push it in with a screwdriver the programmer will release snip Don't be too aggressive when trying to release the clip or it will break. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|