Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Angle grinder to cut old iron pipes
I found some old iron pipes that had been left rolling on my dining
room ceiling by a previous plumber. They are far too long to get out without cutting them or taking up all the floorboards. I have tried a metal cutting blade on my jigsaw but progress is *extremely* slow - the pipes are thick walled and very hard. Will an angle grinder with appropriate cutting disk do the job...I don't actually have an angle grinder otherwise I'd try it. (I've never used one before) TIA Mr F. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Angle Grinder Disks | UK diy | |||
Failed angle grinder | UK diy | |||
The grinder move etc. | Metalworking | |||
Well Water help | Home Repair | |||
Angle Grinder Advice | UK diy |