Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Have just bought a new house which needs painting top to bottom. Our furniture goes in tomorrow, should I be thinking of painting it with a professional spray gun system or knuckle down and use a roller?
|
#2
![]() |
|||
|
|||
![]()
kittykitty wrote:
Have just bought a new house which needs painting top to bottom. Our furniture goes in tomorrow, should I be thinking of painting it with a professional spray gun system or knuckle down and use a roller? Hmmmm... I've always wondered why more people don't use spray guns but then I think about all the masking, which would have to be done painstakingly well unless you fancy spending even more time cleaning off overspray, and the cleaning of the thing itself when a colour change is required. Nah, buy a bunch of rollers and trays. Si |
#3
![]() |
|||
|
|||
![]()
"Mungo \"two sheds\" Toadfoot" wrote in message
kittykitty wrote: should I be thinking of painting it with a professional spray gun system or knuckle down and use a roller? I've always wondered why more people don't use spray guns but then I think about all the masking, which would have to be done painstakingly well unless you fancy spending even more time cleaning off overspray, and the cleaning of the thing itself when a colour change is required. Nah, buy a bunch of rollers and trays. If you are inexperienced with the spray-gun system you will be on a very steep curve. What lets them down worst is clogged guns. A few hours with a roller will do a room top to bottom. Keep it fully loaded and set yourself targets and small rewards. Do all the cutting in around the ceiling and the skirting boards say, in 2 or 3 hours and have a cup of tea and a butty. If you are not that quick, break that down to something more manageable. You will soon get into the swing of it. It's like everything else with a trick to it. Once you get the hang of it and get stuck in, the time you take will vanish in a flash. The trick is to keep a surge of paint rolling up in front of the roller. When that is gone, reload. Then do the ceiling and a wall or two in a couple of hours and have another cuppa. Then finish that room. You only have the windows and door to do. Either start another room or do the woodwork to finish the day then out for a pint. If you and your wife are doing it together, take more time to get a system going and you will knock a lot more off the next day. -- Posted via Mailgate.ORG Server - http://www.Mailgate.ORG |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
1200 degree High heat spray paint stinks, literally | Metalworking | |||
Problem: Moen Faucet Switching from Stream to Spray | Home Repair | |||
Spray painting vs. traditional methods. | Home Repair | |||
indoor walls: spray paint or roll paint with rollers? | Home Repair | |||
SPRAY POLY | Woodworking |