Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Security Camera help
Hi All,
So can anyone help me :-( I have a simple setup (I thought) 4 core cable running to camera (red, black, White and yellow) with a braided coper sheath. I terminated both ends as such....... Power red to positive black to negative (gnd) Video Yellow to centre pin braid to gnd I did that both ends. I have narrowed the problem down to the video side of the cable but what on earth can I be doing wrong? its straight through, have checked and there are no breaks :-( ALSO I have a few camera's with RJ11 connectors. I want to snip them and put on a phono plug and a power plug.... Again I have 4 core cable (no braid this time.....) Red, Black, Blue and yellow Anyone any ideas what I should do here? Thanks Paul |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
[OT] £40 remote security camera & monitor at Woollies | UK diy | |||
OT Guns more Guns | Metalworking | |||
Source: Remington security camera | Electronics Repair | |||
Security Camera question - Your solution is here. | Home Repair | |||
Camcorder as security camera | Electronics Repair |