Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
bond brass torch knob
The O2 adjusting knob in the middle of my Victor torch keeps falling off.
Its a spline and originally had a light press fit. I buggered the spine with a vice grip and stuck it back on a few times over the years. That trick ain't gonna work anymore. How would you bond it so it still could be disassembled if needed? Karl |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Peter Ho has different ideas. With a stack of films and TV dramasunder his belt as well as proving to be a hit in Crouching Tiger, HiddenDragon, he's hoping the Bond producers will encourage a different directionwith a Chinese Bond. Dressed to impres | Woodworking | |||
Bond. James Bond. | Metalworking | |||
Blow torch, propane torch | Home Repair | |||
corner bond | UK diy | |||
brass brazing with a large propane torch | Metalworking |