Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
4 cylinder 28VDC Military Generator set question
Just what can I do with it. Its the typical military stand engine,
made by Teledyne or continental, but it has a lousy 28VDC generator on it. Its fairly large approx 30 inches wide n 24 inches high and about 3 feet long. It runs like a champ...........but 28 VDC is not gonna do me much good. It was obtained for free............so I sure was not gonna turn it down........ ============================================== Put some color in your cheeks...garden naked! |
#2
|
|||
|
|||
"~Roy~" wrote in message ... Just what can I do with it. Its the typical military stand engine, made by Teledyne or continental, but it has a lousy 28VDC generator on it. Its fairly large approx 30 inches wide n 24 inches high and about 3 feet long. It runs like a champ...........but 28 VDC is not gonna do me much good. It was obtained for free............so I sure was not gonna turn it down........ ============================================== Put some color in your cheeks...garden naked! Now you know why it was free! Greg |
#3
|
|||
|
|||
On Sat, 26 Mar 2005 22:41:06 -0600, "Greg O"
wrote: "~Roy~" wrote in message .. . Just what can I do with it. Its the typical military stand engine, made by Teledyne or continental, but it has a lousy 28VDC generator on it. Its fairly large approx 30 inches wide n 24 inches high and about 3 feet long. It runs like a champ...........but 28 VDC is not gonna do me much good. It was obtained for free............so I sure was not gonna turn it down........ ============================================== Put some color in your cheeks...garden naked! Now you know why it was free! Greg Use it to charge 24V batteries to feed a UPS inverter circuit? Gerry :-)} London, Canada |
#4
|
|||
|
|||
Roy Could you get an inverter that converts 24 volts to 220/110 VAC for houshold use as a "back up" generator? For the past few years, I've spent some alot of time repairing high current 28 VDC generators for aircraft ground power units. If it is big enough to seat their needs, maybe you could give it to someone at the local airport, or even sell it if there is enough need there. Jerry "~Roy~" wrote in message ... Just what can I do with it. Its the typical military stand engine, made by Teledyne or continental, but it has a lousy 28VDC generator on it. Its fairly large approx 30 inches wide n 24 inches high and about 3 feet long. It runs like a champ...........but 28 VDC is not gonna do me much good. It was obtained for free............so I sure was not gonna turn it down........ ============================================== Put some color in your cheeks...garden naked! |
#6
|
|||
|
|||
~Roy~ wrote: Just what can I do with it. Its the typical military stand engine, made by Teledyne or continental, but it has a lousy 28VDC generator on it. Its fairly large approx 30 inches wide n 24 inches high and about 3 feet long. It runs like a champ...........but 28 VDC is not gonna do me much good. It was obtained for free............so I sure was not gonna turn it down........ ============================================== Put some color in your cheeks...garden naked! You can make a voltage divider (Google), to drop the uneeded voltage. If you use a 50 ohm potentiometer and some resistors in parallel, you should be able to vary from 0 to 28 volts. Use a voltmeter to measure the output voltage. You would want to use no more than 13.5 VDC to charge or run a 12VDC battery or system. :/ |
#7
|
|||
|
|||
Build an experimental aircraft. Lot's of them being built and powered
with those engines. OR find a large 24 volt motor and build a hybrid auto. -- Steve Williams "~Roy~" wrote in message ... Just what can I do with it. Its the typical military stand engine, made by Teledyne or continental, but it has a lousy 28VDC generator on it. Its fairly large approx 30 inches wide n 24 inches high and about 3 feet long. It runs like a champ...........but 28 VDC is not gonna do me much good. It was obtained for free............so I sure was not gonna turn it down........ ============================================== Put some color in your cheeks...garden naked! ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#8
|
|||
|
|||
~Roy~ wrote:
Just what can I do with it. Its the typical military stand engine, made by Teledyne or continental, but it has a lousy 28VDC generator on it. Its fairly large approx 30 inches wide n 24 inches high and about 3 feet long. It runs like a champ...........but 28 VDC is not gonna do me much good. It was obtained for free............so I sure was not gonna turn it down........ ============================================== Put some color in your cheeks...garden naked! If that 4 cylinder engine is air colled and looks a lot like an aircraft engine then it is worth something as parts. Many of those engines had a special crank case but aircraft rated parts. Homebuilt arcraft can use the case, after modifications and regular aircraft can use the other parts if they have model numbers that indicate "aircraft worthy". Check aircraft engine rebuilders. Bill K7NOM |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT but very important to us all | Woodworking | |||
OT Guns more Guns | Metalworking | |||
Hot water cylinder | UK diy | |||
Hyd. cylinder repair and question | Metalworking | |||
this ought to get everybody fired up.... | Woodworking |