Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Tricks for making hole?
I have some 1/2 inch metal I need to make some large holes in (about 1
inch). This is to put on our tractor tiller to make it set back farther from the tractor tire. All I have is an a/c welder and a cutting torch with small tip. What would be the best way to do this? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Hole size for a faucet in Corian? | Home Repair | |||
2" hole in a 3x2x1/8 rectangular tube | Metalworking | |||
BIG HOLE, NO BRAINS, NEED ANSWER | Metalworking | |||
Access Hole in Slab sealed but still causing musty smell-Help | Home Ownership | |||
Enlarging an existing door knob hole...HELP! | Woodworking |