Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
die-cast pulleys
I had to replace a 3-step pulley on a machine -- the old one broke and
had been replaced with the wrong one which was horrible. My choices were to make one or to buy one. I wound up buying a die cast one from Chicago Die Casting Co. even though I knew going in the runout would be terrible. It was. I put it on a mandrel and was able to true it up on the lathe, though, and now it looks and runs like a 100% lathe-turned step pulley. Only a couple of hours work instead of a couple of days, too, mostly fiddling with setups. I've dissed these die cast pulleys before, but now I know they have enough pot metal in them so that they can be trued up. So, like many things nowadays, you have to regard them as "kits". GWE |
#2
|
|||
|
|||
Grant Erwin wrote:
I had to replace a 3-step pulley on a machine -- the old one broke and had been replaced with the wrong one which was horrible. My choices were to make one or to buy one. I wound up buying a die cast one from Chicago Die Casting Co. even though I knew going in the runout would be terrible. It was. I put it on a mandrel and was able to true it up on the lathe, though, and now it looks and runs like a 100% lathe-turned step pulley. Only a couple of hours work instead of a couple of days, too, mostly fiddling with setups. I've dissed these die cast pulleys before, but now I know they have enough pot metal in them so that they can be trued up. So, like many things nowadays, you have to regard them as "kits". GWE Good to know . Too bad decent pulleys are so pricey . Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt |
#3
|
|||
|
|||
"Ken Cutt" wrote in message Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt Has she had much luck? My wife hasn't had much, seem like just getting older and wiser changes guys more than the women! Just an observation..... Lane |
#4
|
|||
|
|||
Ken Cutt wrote:
Grant Erwin wrote: I had to replace a 3-step pulley on a machine -- the old one broke and had been replaced with the wrong one which was horrible. My choices were to make one or to buy one. I wound up buying a die cast one from Chicago Die Casting Co. even though I knew going in the runout would be terrible. It was. I put it on a mandrel and was able to true it up on the lathe, though, and now it looks and runs like a 100% lathe-turned step pulley. Only a couple of hours work instead of a couple of days, too, mostly fiddling with setups. I've dissed these die cast pulleys before, but now I know they have enough pot metal in them so that they can be trued up. So, like many things nowadays, you have to regard them as "kits". GWE Good to know . Too bad decent pulleys are so pricey . Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt A good source for multi-step drive pulleys and more are the cheap benchtop drill presses from the orient. You can buy them new for $40, and they come with two stepped pulleys and other usable hardware. Pulleys are steel or cast iron on the ones I've looked at. I've seen them used to make a complete drive setup for small lathes. -- - - Rex Burkheimer WM Automotive Fort Worth TX |
#5
|
|||
|
|||
A good source for multi-step drive pulleys and more are the cheap benchtop drill presses from the orient. You can buy them new for $40, and they come with two stepped pulleys and other usable hardware. Pulleys are steel or cast iron on the ones I've looked at. I've seen them used to make a complete drive setup for small lathes. Seems to me like the original reason I started looking into wonky step pulleys was because of the terrible manufacturing standards in the import drill press step pulleys .. oh, well. GWE |
#6
|
|||
|
|||
Grant Erwin wrote:
A good source for multi-step drive pulleys and more are the cheap benchtop drill presses from the orient. You can buy them new for $40, and they come with two stepped pulleys and other usable hardware. Pulleys are steel or cast iron on the ones I've looked at. I've seen them used to make a complete drive setup for small lathes. Seems to me like the original reason I started looking into wonky step pulleys was because of the terrible manufacturing standards in the import drill press step pulleys .. oh, well. GWE Of course, you'd want true them up before use. Think of them as rough castings -- - - Rex Burkheimer WM Automotive Fort Worth TX |
#7
|
|||
|
|||
Lane wrote:
"Ken Cutt" wrote in message Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt Has she had much luck? My wife hasn't had much, seem like just getting older and wiser changes guys more than the women! Just an observation..... Lane Welllll she thinks she is making progress . Why just the other day she managed to get me to admit that toilets do indeed have seats that move ;-) . Ken Cutt |
#8
|
|||
|
|||
Check with the parts department at Horrible Freight. Just pick out a
unit that has parts you like, grab the model number, go on-line to get the parts breakdown and call them up. I needed a 1/2"+ drill chuck with a #2 MT. I had a suitable chuck from an old drill but the best price I could find for the 1/2"x20 arbor was $20. HF had a new 5/8" capacity chuck with arbor for $9 plus $3 shipping. Tough to beat that price. Rex B wrote: Ken Cutt wrote: Grant Erwin wrote: I had to replace a 3-step pulley on a machine -- the old one broke and had been replaced with the wrong one which was horrible. My choices were to make one or to buy one. I wound up buying a die cast one from Chicago Die Casting Co. even though I knew going in the runout would be terrible. It was. I put it on a mandrel and was able to true it up on the lathe, though, and now it looks and runs like a 100% lathe-turned step pulley. Only a couple of hours work instead of a couple of days, too, mostly fiddling with setups. I've dissed these die cast pulleys before, but now I know they have enough pot metal in them so that they can be trued up. So, like many things nowadays, you have to regard them as "kits". GWE Good to know . Too bad decent pulleys are so pricey . Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt A good source for multi-step drive pulleys and more are the cheap benchtop drill presses from the orient. You can buy them new for $40, and they come with two stepped pulleys and other usable hardware. Pulleys are steel or cast iron on the ones I've looked at. I've seen them used to make a complete drive setup for small lathes. |
#9
|
|||
|
|||
"Ken Cutt" wrote in message ... Lane wrote: "Ken Cutt" wrote in message Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt Has she had much luck? My wife hasn't had much, seem like just getting older and wiser changes guys more than the women! Just an observation..... Lane Welllll she thinks she is making progress . Why just the other day she managed to get me to admit that toilets do indeed have seats that move ;-) . Ken Cutt Yeah, so...? When she wants it down, she can put it down. |
#10
|
|||
|
|||
I'm thinking about cutting a deal: The toilet seat will go down upon
leaving the bath room when the light switch handles go down upon leaving the other rooms. Lane wrote: "Ken Cutt" wrote in message ... Lane wrote: "Ken Cutt" wrote in message Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt Has she had much luck? My wife hasn't had much, seem like just getting older and wiser changes guys more than the women! Just an observation..... Lane Welllll she thinks she is making progress . Why just the other day she managed to get me to admit that toilets do indeed have seats that move ;-) . Ken Cutt Yeah, so...? When she wants it down, she can put it down. |
#11
|
|||
|
|||
RoyJ wrote:
... HF had a new 5/8" capacity chuck with arbor for $9 plus $3 shipping. Tough to beat that price. I assume that you kept the arbor and threw the chuck away? Bob |
#12
|
|||
|
|||
I'm thinking about cutting a deal: The toilet seat will go down upon
leaving the bath room when the light switch handles go down upon leaving the other rooms. Lane wrote: "Ken Cutt" wrote in message ... Lane wrote: "Ken Cutt" wrote in message Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt Has she had much luck? My wife hasn't had much, seem like just getting older and wiser changes guys more than the women! Just an observation..... Lane Welllll she thinks she is making progress . Why just the other day she managed to get me to admit that toilets do indeed have seats that move ;-) . Ken Cutt Yeah, so...? When she wants it down, she can put it down. Always kinda wondered..... When I go there, and if I plan on sitting, I always look to see if the seat is down..... I don't really understand what the big deal is.. some have said that they sit on the bare porcelain bowl because the seat was up.... obviously didn't look. Kinda like backing the car into the garage without looking to see if the garage door is up.... Ken. |
#13
|
|||
|
|||
On Sun, 06 Mar 2005 03:40:36 GMT, Ken Sterling (Ken Sterling) wrote:
Always kinda wondered..... When I go there, and if I plan on sitting, I always look to see if the seat is down..... I don't really understand what the big deal is.. some have said that they sit on the bare porcelain bowl because the seat was up.... obviously didn't look. Kinda like backing the car into the garage without looking to see if the garage door is up.... Ken. OTOH what is the other solid flat piece called? The lid, right? Gerry :-)} London, Canada |
#14
|
|||
|
|||
Back before I retired, I was in the hangers $hithouse washing up sa it was time for lunch. One of the stalls was occupied, and then I heard a flush, and a ahhhhhhhhh %^*(*&%^&%$^%$^& . The door opens up and the person was really ****ed to say the least. It was common for us to put our hats in our waistband with the bill between the belt loops, and since we were military it was mandatory to always have your headgear close by. Well it turned out this dude backed up to the john, and loaded up his hat instead of the bowl......... How about that old trick with wrapping the bowl with saran wrap! On Sat, 05 Mar 2005 23:16:12 -0500, Gerald Miller wrote: ===On Sun, 06 Mar 2005 03:40:36 GMT, Ken Sterling (Ken Sterling) wrote: === === ===Always kinda wondered..... When I go there, and if I plan on sitting, ===I always look to see if the seat is down..... I don't really ===understand what the big deal is.. some have said that they sit on the ===bare porcelain bowl because the seat was up.... obviously didn't ===look. Kinda like backing the car into the garage without looking to ===see if the garage door is up.... ===Ken. ===OTOH what is the other solid flat piece called? The lid, right? ===Gerry :-)} ===London, Canada ============================================== Put some color in your cheeks...garden naked! |
#15
|
|||
|
|||
Lane wrote:
"Ken Cutt" wrote in message ... Lane wrote: "Ken Cutt" wrote in message Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt Has she had much luck? My wife hasn't had much, seem like just getting older and wiser changes guys more than the women! Just an observation..... Lane Welllll she thinks she is making progress . Why just the other day she managed to get me to admit that toilets do indeed have seats that move ;-) . Ken Cutt Yeah, so...? When she wants it down, she can put it down. First 30 years to get this far lets not rush in too fast and spoil the next 30 ;-) . After that I am fully prepared to make a small change ;-) . Ken Cutt |
#16
|
|||
|
|||
On Sat, 05 Mar 2005 00:35:05 -0800, Ken Cutt
wrote: Lane wrote: "Ken Cutt" wrote in message Umm by the way my wife always considered me a " kit " ;-) . At least she has dedicated most of her life to fixing whats wrong with me . Ken Cutt Has she had much luck? My wife hasn't had much, seem like just getting older and wiser changes guys more than the women! Just an observation..... Lane Welllll she thinks she is making progress . Why just the other day she managed to get me to admit that toilets do indeed have seats that move ;-) . Ken Cutt That's nothing a good welder can't fix!!! |
#17
|
|||
|
|||
|
#18
|
|||
|
|||
On Mon, 07 Mar 2005 16:13:30 -0500, the inscrutable John
spake: Welllll she thinks she is making progress . Why just the other day she managed to get me to admit that toilets do indeed have seats that move ;-) . Ken Cutt That's nothing a good welder can't fix!!! My wife prefers to find the toilet seat up, she hates it to have to sit down on a wet one. Some women are less flexible. http://www.funny.co.uk/stuff/art_175...al-Toilet.html ================================================== ======== I drank WHAT? + http://www.diversify.com --Socrates + Web Application Programming |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Req'd: Cast Iron Soil Pipe bracket and Cast Iron>Plastic fittings | UK diy | |||
PULLEYS OR SHEAVES? | Metalworking | |||
Wrought Iron, Cast Alum and Cast Iron Decorative welding | Metalworking | |||
Cast Iron sewer -- Is it a hazard? | Home Repair | |||
Cast Iron sewer -- Is it a hazard? | Home Ownership |