Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Looking for oil filter adapter ?
I am lookiing for an oil filter adapter ( close threaded nipple) . I
want to use a 5/8"-18 oil filter orn a 3/4"-16. I am sure that these are made but I can seem to find them at the local auto parts store . Do they have another name? Sources ? - thanks |
#3
|
|||
|
|||
"Nate Nagel" wrote in message ... wrote: I am lookiing for an oil filter adapter ( close threaded nipple) . I want to use a 5/8"-18 oil filter orn a 3/4"-16. I am sure that these are made but I can seem to find them at the local auto parts store . Do they have another name? Sources ? - thanks Um, unless you've typed the sizes backwards, you're not going to find one, 5/8" being smaller than 3/4" Why do you want to do this, anyway? What's wrong with the stock filter for your application? nate He's talking about the threaded insert that screws into the block. Looks sort of like a pipe nipple with a hex shaped ID. To the original poster, can't say I've ever seen one. I've got a few metric to 3/4, but not as aftermarket parts, just OEM.. |
#4
|
|||
|
|||
wrote in message ... I am lookiing for an oil filter adapter ( close threaded nipple) . I want to use a 5/8"-18 oil filter orn a 3/4"-16. I am sure that these are made but I can seem to find them at the local auto parts store . Do they have another name? Sources ? - thanks Just curious on what filter has a 5/8"-18 thread. After posting my other reply, I think I did have a few adapters, but these were machined in house... |
#5
|
|||
|
|||
On Sat, 26 Feb 2005 12:36:24 GMT, the inscrutable
spake: I am lookiing for an oil filter adapter ( close threaded nipple) . I want to use a 5/8"-18 oil filter orn a 3/4"-16. I am sure that these are made but I can seem to find them at the local auto parts store . Do they have another name? Sources ? - thanks I doubt there is anything like that available. The size is too close. More likely is a replacement housing with the smaller thread size. What are you working on? --- - Sarcasm is just one more service we offer. - http://diversify.com Web Applications |
#6
|
|||
|
|||
I just found one -
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WD1V - so they do exist . If I only knew the exact catalog description and part # I could probably get NAPA to order it and pick it up for a few $ . On Sat, 26 Feb 2005 12:36:24 GMT, wrote: I am lookiing for an oil filter adapter ( close threaded nipple) . I want to use a 5/8"-18 oil filter orn a 3/4"-16. I am sure that these are made but I can seem to find them at the local auto parts store . Do they have another name? Sources ? - thanks |
#7
|
|||
|
|||
On Sat, 26 Feb 2005 22:12:29 GMT, the inscrutable
spake: I just found one - http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WD1V - so they do exist . If I only knew the exact catalog description and part # I could probably get NAPA to order it and pick it up for a few $ . Oh, the filters you have now are MALE threaded and you want to go to a standard female threaded style? Why dincha say so? Print out that Ebay find and take it to the NAPA store. Have the guy fax it in and let their distribution guys worry about it. Or contact any of the bypass filter folks who make them for their units. You now have mfgr names and filter model numbers! - Yea, though I walk through the valley of Minwax, I shall stain no Cherry. http://diversify.com |
#8
|
|||
|
|||
wrote:
I just found one - http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WD1V - so they do exist . If I only knew the exact catalog description and part # I could probably get NAPA to order it and pick it up for a few $ . On Sat, 26 Feb 2005 12:36:24 GMT, wrote: I am lookiing for an oil filter adapter ( close threaded nipple) . I want to use a 5/8"-18 oil filter orn a 3/4"-16. I am sure that these are made but I can seem to find them at the local auto parts store . Do they have another name? Sources ? - thanks Jeez!! $12 plus $5 S&H. $17 apiece. I think I'll make a few hundred next weekend on our 2 spindle cnc lathe at work in my extra time. Think I could sell them all at $9 plus $4 S&H? -- Steve Walker (remove wallet to reply) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Home Water Purifier - Carbon Filter system - Time to Change? | Home Ownership | |||
York Furnace Filter (High velocity)? | Home Ownership | |||
York Furnace Filter (High velocity)? | Home Repair | |||
poor furnace/ac filter fit | Home Repair | |||
Water filter attached to kitchen sink has slowed right down... | Home Repair |