Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
FS, Mill
I have an old mill for sale. It is a Kempsmith horizontal mill with a
Bridgeport head mounted on the overarm. The horizontal mill part has a 7-1/2 hp motor and power feed works on the X and Z axis (I think a gear is missing on the Y axis). The table is ~12 X 50 and estimated weight of this machine is 4500 lbs. I have a fork lift and can load it for you. It is located in Southern Illinois, city of DuQuoin. When I bought this mill, it had been sitting outside and I had to replace the spindle bearings in the bridgport head. I probably have less than 40 hours use on the mill with the new spindle bearings. Asking $1000 Thanks! |
#2
|
|||
|
|||
I've had a couple of requests for pictures of the mill, I'll try to take
some soon and get them posted. "RogerN" wrote in message nk.net... I have an old mill for sale. It is a Kempsmith horizontal mill with a Bridgeport head mounted on the overarm. The horizontal mill part has a 7-1/2 hp motor and power feed works on the X and Z axis (I think a gear is missing on the Y axis). The table is ~12 X 50 and estimated weight of this machine is 4500 lbs. I have a fork lift and can load it for you. It is located in Southern Illinois, city of DuQuoin. When I bought this mill, it had been sitting outside and I had to replace the spindle bearings in the bridgport head. I probably have less than 40 hours use on the mill with the new spindle bearings. Asking $1000 Thanks! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|