Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Hydraulics for backhoe thumb question
I need to make a thumb for the 580CK Case tractor backhoe.
The bucket on the front of the machine will keep the same angle as it is raised and lowered. So, for example, if the operator tilts the bucket to a ten degree angle with one lever it will keep that angle as the bucket is raised or lowered with the other lever. I want to plumb the thumb to work the same way. It appears to me that it may be valving that makes the front bucket behave this way. Anybody know how this is done? Thanks, Eric R Snow |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT Guns more Guns | Metalworking | |||
Philisophical Woodworking Question | Woodworking | |||
tilt batten question | UK diy | |||
Simple question regarding Ceiling tiles and sound? | UK diy | |||
Plumbing Question | UK diy |