Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Bending Perfect Rings???? Help!!!
I have tried to use my bender to make 14" perfect rings out of 1/4 inch steel
rod, however I keep having the same problem! They are not perfect!! They are not flat rings--when I lay them on the table they are not even close to lying flat!! I can't figure out what I am doing wrong!! Also they are not perfectly round. Is there anything I can do--I kinda need to make a lot of them, any help would be greatly appreciated! Shannan |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bending wood and making dice | Woodworking | |||
What is "bending plywood"? | Woodworking | |||
bending sheet metal into a cylinder | Metalworking | |||
scroll bending jig | Metalworking |