Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
need help with electric motor wiring
Hi,
I have drill motor, from a reversing drill. It has 4 leads- 1 for each brush, and 2 going into the motor. How do I connect these leads, and also what do I change to reverse the direction. Thanks very much for your help! Joe |
#2
|
|||
|
|||
|
#4
|
|||
|
|||
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Gas vs. Electric Dryer | Home Ownership | |||
GE HTS22GBMARWW Digital Controls refrig 22 cu ft.....main bord failure number #3! | Home Repair | |||
Air V/S Electric ratchet tool | Home Repair | |||
Cutting floor tiles: Electric or Hand Operated cutter? | UK diy |