Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Threaded Rod Expert Out There?
I have a unique challenge at hand. I need to find 1/2 or greater diameter
threaded rod in the following thread pitch combinations: 10 11 12 13 14 16 18 20 24 28 32 40 I'd settle for 3/8 diameter if I had to, but the real question is whether there is a single diameter rod that is available in all those thread pitch combinations. Size of the rod is not too important, but a 6" diameter won't work either. If I could get 10 out of the 12 in a single diameter rod, that would be great too... Any suggestions would be greatly appreciated. Regards, Joe Agro, Jr. http://www.autodrill.com http://www.multi-spindle-heads.com V8013 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
threaded copper supply fittings | Home Repair | |||
Connecting Delinghi Gas Cooker to flexible (threaded) hose connector | UK diy | |||
Mounting 5/32" X 1/2" long threaded rod in 1/2" sheet steel, 36 times? | Metalworking |