Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #15   Report Post  
Gunner
 
Posts: n/a
Default

On 4 Dec 2004 18:06:50 GMT, Ignoramus7135
wrote:


Assuming that the green paint is not on a jacket over the real
manifold..it would appear to be unused.


Here are super detailed pictures of the exhaust manifold:

http://igor.chudov.com/tmp/onan/Diesel/home/exhaust/

It does appear to not be in any sort of a jacket. The rusted fitting
is the fitting that the engine came with, and the new looking piece is
mine.


Based on those photos..your engine has been run..but not very darned
much.

Btw, I assume you are trying to start this from the battery in your
vehicle, correct? Of course be sure your vehicle is running when
turning over the starter.

Post the details of how you got it and for how much. G

I may award you a Gunner's Gold Star for Scounging.

Gunner

"I mean, when's the last time you heard of a college where the Young
Republicans staged a "Sit In" to close down the Humanities building?
On the flip side, how many sit in's were staged to close the ROTC building back in the '60's?
Liberals stage protests, do civil disobedience, etc.
Conservatives talk politely and try to work out a solution to problems
through discourse until they believe that talking won't work... they they go home and open the gun cabinets.
Pray things never get to the point where the conservatives decide that
"civil disobedience" is the next step, because that's a very short route to "voting from the rooftops"
Jeffrey Swartz, Misc.Survivalism


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Surface ground water problem [email protected] Home Repair 2 July 9th 04 07:53 PM
Water Pump / Pressure Tank Problem !!!!!! James Nipper Home Repair 9 June 28th 04 02:13 AM
AV problem with philips 32PW6005 Leeder Home Repair 0 June 5th 04 05:07 PM
Problem with retrace lines on EIZO F55S... [email protected] Electronics Repair 2 October 20th 03 01:29 AM


All times are GMT +1. The time now is 08:58 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"