Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Arbor press insert help
Hi all,
I purchased a small cheap arbor press to use around the house for odd jobs. I would like to make different inserts that would attach to the end of the ram. What would be the best way to do this. I thought of boring a hole in the end to accept the shank of the insert and tapping a small hole on the side to insert a thumb screw to hold the insert in. Does that sound like a decent idea or is there a better way? Thanks, Gene -- This message has been scanned by Norton Anti-virus software |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Zero clearance insert fights back. | Woodworking | |||
How To Make A Zero Clearance Insert With Splitter | Woodworking | |||
Problem: Squirrel in Fireplace Insert! | Metalworking | |||
Fireplace insert insulation | Home Repair | |||
Carbide Insert 101 | Metalworking |