Somewhere I have seen a vertical rack of small jars suitable for
screws, etc. It was in a catalog next to bins on shelves. But
now I can't find them.

Anybody seen same for sale?

--
A host is a host from coast to
& no one will talk to a host that's close..........................
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433

"David Lesher" wrote in message ...

Somewhere I have seen a vertical rack of small jars suitable for
screws, etc. It was in a catalog next to bins on shelves. But
now I can't find them.

Anybody seen same for sale?
-----------------------

I thought jars with lids screwed to a rack was a good idea until I saw one
in person. They use space poorly because they have to be separated for hand
clearance. Close nesting rectangular containers like Akro bins fit much more
into the same wall area.

I separate screws by thread size and whether rust-proof or not, but not by
length, which greatly reduces the number of bins and fills them better.
Often I don't know the best length until I take the bin to where I'm
assembling the device and try a few sizes.

On Tue, 16 Mar 2021 18:03:09 -0400, "Jim Wilkins"
wrote:

"David Lesher" wrote in message ...

Somewhere I have seen a vertical rack of small jars suitable for
screws, etc. It was in a catalog next to bins on shelves. But
now I can't find them.

Anybody seen same for sale?
-----------------------

I thought jars with lids screwed to a rack was a good idea until I saw one
in person. They use space poorly because they have to be separated for hand
clearance. Close nesting rectangular containers like Akro bins fit much more
into the same wall area.

I separate screws by thread size and whether rust-proof or not, but not by
length, which greatly reduces the number of bins and fills them better.
Often I don't know the best length until I take the bin to where I'm
assembling the device and try a few sizes.
From way way back, I collected a couple hundred half pound tobacco
tins with twist off lids (I smoked a pipe and our office manager
rolled cigarettes for herself and ex-military husband), these rest on
1x2's across the open side of the mid-basement support wall, three per
space. An alternate container is the cardboard sided tins about 4"
dia. by 3" high with snap on plastci lids that come full of nuts (the
edible kind)

On 3/16/2021 11:06 PM, Gerry wrote:
On Tue, 16 Mar 2021 18:03:09 -0400, "Jim Wilkins"
I thought jars with lids screwed to a rack was a good idea until I saw one
in person. They use space poorly because they have to be separated for hand
clearance. Close nesting rectangular containers like Akro bins fit much more
into the same wall area.


... these rest on
1x2's across the open side of the mid-basement support wall, three per
space. ...


As Jim said, I have found such arrangements to be very inefficient of
space used.

For instance - the tobacco tins. If the tins are 6"t & 4+" wide, 3 of
them take 6 x 16 sq in of wall (32 sq in each). If instead that wall
space was used for divided drawers like this:
https://tinyurl.com/yehx6582

You might get 4 or 5 compartments in the same area on the wall.

Can't compete on price!

"Bob Engelhardt" wrote in message ...

On 3/16/2021 11:06 PM, Gerry wrote:
On Tue, 16 Mar 2021 18:03:09 -0400, "Jim Wilkins"
I thought jars with lids screwed to a rack was a good idea until I saw
one
in person. They use space poorly because they have to be separated for
hand
clearance. Close nesting rectangular containers like Akro bins fit much
more
into the same wall area.


... these rest on
1x2's across the open side of the mid-basement support wall, three per
space. ...


As Jim said, I have found such arrangements to be very inefficient of
space used.

For instance - the tobacco tins. If the tins are 6"t & 4+" wide, 3 of
them take 6 x 16 sq in of wall (32 sq in each). If instead that wall
space was used for divided drawers like this:
https://tinyurl.com/yehx6582

You might get 4 or 5 compartments in the same area on the wall.

Can't compete on price!

--------------------------------------

I do use repurposed screw-lid containers, mostly instant coffee, for
non-spilling storage I may carry around, such as small parts of disassembled
equipment and brass etc saw chips off the bandsaw.

On Thu, 18 Mar 2021 09:24:45 -0400, Bob Engelhardt
wrote:

On 3/16/2021 11:06 PM, Gerry wrote:
On Tue, 16 Mar 2021 18:03:09 -0400, "Jim Wilkins"
I thought jars with lids screwed to a rack was a good idea until I saw one
in person. They use space poorly because they have to be separated for hand
clearance. Close nesting rectangular containers like Akro bins fit much more
into the same wall area.


... these rest on
1x2's across the open side of the mid-basement support wall, three per
space. ...


As Jim said, I have found such arrangements to be very inefficient of
space used.

For instance - the tobacco tins. If the tins are 6"t & 4+" wide, 3 of
them take 6 x 16 sq in of wall (32 sq in each). If instead that wall
space was used for divided drawers like this:
https://tinyurl.com/yehx6582

You might get 4 or 5 compartments in the same area on the wall.

Can't compete on price!
And lotsa luck finding a significant quantity of those

Gerry wrote:
On Thu, 18 Mar 2021 09:24:45 -0400, Bob Engelhardt
wrote:

On 3/16/2021 11:06 PM, Gerry wrote:
On Tue, 16 Mar 2021 18:03:09 -0400, "Jim Wilkins"
I thought jars with lids screwed to a rack was a good idea until I saw one
in person. They use space poorly because they have to be separated for hand
clearance. Close nesting rectangular containers like Akro bins fit much more
into the same wall area.

... these rest on
1x2's across the open side of the mid-basement support wall, three per
space. ...

As Jim said, I have found such arrangements to be very inefficient of
space used.

For instance - the tobacco tins. If the tins are 6"t & 4+" wide, 3 of
them take 6 x 16 sq in of wall (32 sq in each). If instead that wall
space was used for divided drawers like this:
https://tinyurl.com/yehx6582

You might get 4 or 5 compartments in the same area on the wall.

Can't compete on price!
And lotsa luck finding a significant quantity of those


I've seen the vertical magnetic jars sold for kitchen storage. I have
re-used pill bottles for small storage on the bench, things like T-Pins
and probe tips for the meters are handy that way.

--
Steve W.