Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Back After Ten Years (or so)
Last followed this group via usenet 10 or so years ago and have just rediscovered it via Google Groups. Two things immediately noted:
"Gunner" seems to be gone. It's still infested by BDRs (I guess some things never change ) Too bad really - the on topic posts were (are?) v useful... |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Back After Ten Years (or so)
Laf Fal fired this volley in
: Last followed this group via usenet 10 or so years ago and have just rediscovered it via Google Groups. Two things immediately noted: "Gunner" seems to be gone. Hmmm... you must not have gone TOO far back in the group history, since Gunner posted some things in the last week, or so. The single most-destructive thing to intelligent discourse here is that our community mental-defective, Jon Banquer, is still here, although he tells the world that ANYONE who EVER uses the USENETS is a total loser! G Almost everyone except a few users who like to argue with him have plonked him completely, and you'd be well-advised to do so the first time you see him post or respond. Those few keep rehashing his stupidity, and he even answers his own posts under a couple of pseudonyms, so we still have to endure some of it. Lloyd |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Back After Ten Years (or so)
On Friday, December 25, 2015 at 5:21:49 PM UTC-8, Uncle Loud lied as per usual. Uncle Loud knows he's my bitch and that I own him:
|
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Back After Ten Years (or so)
On Fri, 25 Dec 2015 16:11:03 -0800 (PST), Laf Fal
wrote: Last followed this group via usenet 10 or so years ago and have just rediscovered it via Google Groups. Two things immediately noted: "Gunner" seems to be gone. It's still infested by BDRs (I guess some things never change ) Too bad really - the on topic posts were (are?) v useful... Really? So where did I go? And what nym did you use 10 yrs ago? Gunner |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Back After Ten Years (or so)
On Friday, December 25, 2015 at 4:11:16 PM UTC-8, Laf Fal wrote:
Last followed this group via usenet 10 or so years ago and have just rediscovered it via Google Groups. Two things immediately noted: "Gunner" seems to be gone. It's still infested by BDRs (I guess some things never change ) Too bad really - the on topic posts were (are?) v useful... This group has been totally destroyed. The majority of quality machining and CADCAM content is now on better run LinkedIn groups like my group: CADCAM Technology Leaders. LinkedIn groups are far better than this group ever was even in its heyday. What destroyed this group was Mark Wieber cross posting to survival and political groups. Since Wieber had a stroke he's next to useless and lies worse than ever. I stick around to make life pure hell for lying **** bags and frauds like slow eddy. Mark Wieber's clique of idiots now dominate this group: Uncle Loud, Larry Jackass, Tom Gardner, iggy poop, etc... all worthless sacks of **** that are totally out of touch with reality. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to fit electrical back box if there is no back?!? | UK diy | |||
Fixing door handles back to back? | Home Repair | |||
looking for: plans for table saw cabinet in magazine a few years back | Woodworking | |||
Back to back gas fires | UK diy | |||
Building code: Electrical boxes back-to-back, how many | Home Ownership |