Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Stuck batteries..
I've been handed a nice mag-lite with LED
bulb and the batteries leaked and are now stuck in place. Perhaps this has come up before here but how can they be removed? So far I tried soaking them in PFM then pulling on them with a screw and pliers. No luck, no movement at all. Before I step it up a notch what do you say about this? The bulb end is easily removed and down in there is a thin snap ring that could be a challenge to remove. If that comes out perhaps the batteries can be driven out instead of pulled? It's a very nice flashlight and worth working on. phil k. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Video showing heavy flour in AA batteries: any way for layman to testNiMH batteries? | Electronics Repair | |||
I am stuck | Home Repair | |||
TRV stuck | UK diy | |||
cd stuck | Electronics Repair | |||
Stuck CD | Electronics Repair |