Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal-related work
A rainy/icy nasty day , but I did get some quality time in out in The
Annex today . I spent some time today working on one pattern and almost completing a second for parts to the Gingery shaper I'm building . If all goes well I'll have the sides and front cast by midweek (got beehives in process too , and they take priority) and machined by the end . I think the ram is next in the build sequence . And I've got a big pile of salvaged lumber to use , all of it seasoned at least 20-30 years . I had forgotten how much I used to enjoy woodwork - before it became my livelihood . -- Snag |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal-related work
On Sun, 11 Jan 2015 21:13:30 -0600, "Terry Coombs"
wrote: A rainy/icy nasty day , but I did get some quality time in out in The Annex today . I spent some time today working on one pattern and almost completing a second for parts to the Gingery shaper I'm building . If all goes well I'll have the sides and front cast by midweek (got beehives in Aluminum castings? Are you taking pics of the process yet? process too , and they take priority) and machined by the end . I think the ram is next in the build sequence . And I've got a big pile of salvaged lumber to use , all of it seasoned at least 20-30 years . I had forgotten how much I used to enjoy woodwork - before it became my livelihood . I can see those hives now: Bird's-eye maple frames, quilted sapele boxes, bocote landing, and amboyna burl lid with ebony trim. bseg Whoo-eee! -- In an industrial society which confuses work and productivity, the necessity of producing has always been an enemy of the desire to create. -- Raoul Vaneigem |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal-related work
Larry Jaques wrote:
On Sun, 11 Jan 2015 21:13:30 -0600, "Terry Coombs" wrote: A rainy/icy nasty day , but I did get some quality time in out in The Annex today . I spent some time today working on one pattern and almost completing a second for parts to the Gingery shaper I'm building . If all goes well I'll have the sides and front cast by midweek (got beehives in Aluminum castings? Are you taking pics of the process yet? process too , and they take priority) and machined by the end . I think the ram is next in the build sequence . And I've got a big pile of salvaged lumber to use , all of it seasoned at least 20-30 years . I had forgotten how much I used to enjoy woodwork - before it became my livelihood . I can see those hives now: Bird's-eye maple frames, quilted sapele boxes, bocote landing, and amboyna burl lid with ebony trim. bseg Whoo-eee! Vivid imagination ! The hive bodies are plywood from cabinet doors and boards that were closet shelves . The frames are from Dadant , I think , purchased at the Arkansas Beekeeper Ass'n annual meeting . I'll start taking some pics when I begin casting , including ramming up the molds and getting ready to pour . Here's a link to Rick Sparber's build , with a lot of pictures and how-to's : http://rick.sparber.org/Articles/CD/CDM/CD.htm I'll be finishing up the hive bodies before I tart casting , they take up a big part of my table space , I also need to get the table saw on wheels somehow , it also takes up space that I need to safely pour 1350° molten metal . -- Snag |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal-related work
On Sun, 11 Jan 2015 22:24:40 -0600, "Terry Coombs"
wrote: Larry Jaques wrote: On Sun, 11 Jan 2015 21:13:30 -0600, "Terry Coombs" wrote: A rainy/icy nasty day , but I did get some quality time in out in The Annex today . I spent some time today working on one pattern and almost completing a second for parts to the Gingery shaper I'm building . If all goes well I'll have the sides and front cast by midweek (got beehives in Aluminum castings? Are you taking pics of the process yet? process too , and they take priority) and machined by the end . I think the ram is next in the build sequence . And I've got a big pile of salvaged lumber to use , all of it seasoned at least 20-30 years . I had forgotten how much I used to enjoy woodwork - before it became my livelihood . I can see those hives now: Bird's-eye maple frames, quilted sapele boxes, bocote landing, and amboyna burl lid with ebony trim. bseg Whoo-eee! Vivid imagination ! No, that would have been a Yuppie nightmare. g I was makin' fun. The hive bodies are plywood from cabinet doors and boards that were closet shelves . Oh, "no expenses spared" hives. I see. The frames are from Dadant , I think , Isn't everything? I think their name comes up in every search I've made since thinking about keeping bees. purchased at the Arkansas Beekeeper Ass'n annual meeting . I'll start taking some pics when I begin casting , including ramming up Good good. the molds and getting ready to pour . Here's a link to Rick Sparber's build , with a lot of pictures and how-to's : http://rick.sparber.org/Articles/CD/CDM/CD.htm Cool! I'll check it out. We used an aluminum block my buddy Glenn cast for the router holder on the CNC. It was mostly melted pistons from Detroit. (His daughter owns a GM product, so he has plenty of broken parts to play with. She keeps him very busy with her lemons.) shakes head I'll be finishing up the hive bodies before I tart casting , they take up a big part of my table space , I also need to get the table saw on wheels somehow , it also takes up space that I need to safely pour 1350° molten metal. I'd imagine that takes some consideration, both for horizontal and vertical axes. A long while back, I remember reading about a guy who did a pour in his garage, under the open garage door. The heat plume (correct word for rising vapor cloud during pour?) cracked the window and welded some of the plastic door parts together, requiring surgery prior to being able to shut it again. Oops! -- In an industrial society which confuses work and productivity, the necessity of producing has always been an enemy of the desire to create. -- Raoul Vaneigem |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Uh Oh, metal related. Gluing glass to metal? | Metalworking | |||
faucet key 3/8 (metal work related) | Metalworking | |||
VERY good video NOT METAL RELATED - VETERANS DAY RELATED | Metalworking | |||
Metal down the drain OT but metal related | Metalworking | |||
Garden Sprayer (with metal wand; metal related) | Metalworking |