Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Printing decals with alps
I am looking for someone that can print in white. I have my own graphics
but I need to print on clear water slide paper with a white underlay so they will show up on dark surfaces. Can you perform this task. -- posted from http://www.polytechforum.com/metalwo...ps-605191-.htm using PolytechForum's Web, RSS and Social Media Interface to rec.crafts.metalworking and other engineering groups |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Printing decals with alps
On Fri, 24 Oct 2014 19:18:03 +0000, Diecastfromthepast wrote:
I am looking for someone that can print in white. I have my own graphics but I need to print on clear water slide paper with a white underlay so they will show up on dark surfaces. Can you perform this task. I can't do what you ask, but you can get white decal paper -- I assume this is a non-starter for you? You're also aware that you can make up signs using cut vinyl, yes? -- Tim Wescott Wescott Design Services http://www.wescottdesign.com |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Printing decals with alps
On Fri, 24 Oct 2014 16:25:55 -0500, Tim Wescott
wrote: On Fri, 24 Oct 2014 19:18:03 +0000, Diecastfromthepast wrote: I am looking for someone that can print in white. I have my own graphics but I need to print on clear water slide paper with a white underlay so they will show up on dark surfaces. Can you perform this task. I can't do what you ask, but you can get white decal paper -- I assume this is a non-starter for you? You're also aware that you can make up signs using cut vinyl, yes? My suspiscion, from his handle, is it is quite fine lettering for scale die-cast models - extremely hard to cur vinyl that fine - and it would be too thick too. |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Printing decals with alps
On Sat, 25 Oct 2014 23:23:03 -0400, wrote:
On Fri, 24 Oct 2014 16:25:55 -0500, Tim Wescott wrote: On Fri, 24 Oct 2014 19:18:03 +0000, Diecastfromthepast wrote: I am looking for someone that can print in white. I have my own graphics but I need to print on clear water slide paper with a white underlay so they will show up on dark surfaces. Can you perform this task. I can't do what you ask, but you can get white decal paper -- I assume this is a non-starter for you? You're also aware that you can make up signs using cut vinyl, yes? My suspiscion, from his handle, is it is quite fine lettering for scale die-cast models - extremely hard to cur vinyl that fine - and it would be too thick too. I think the dye-sub machines are the only ones to put out a white ink. Back when I was doing graphic design, I longed for one of those, specifically any $1,000 Alps machine. Diecast, try www.dyesublimation.com and look for local printers who might use that tech. -- A mind, like a home, is furnished by its owner, so if one's life is cold and bare he can blame none but himself. -- Louis L'Amour |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
OT Printing Small Decals | Metalworking | |||
ALPS motor/servo function selector switch | Electronics Repair | |||
Identifying component and some pointers to repair an ALPS printer PSU. | Electronics Repair | |||
diagram ALPS tuner module | Electronics Repair | |||
Learn French in the Alps. | Woodturning |